Question about 2000 Ford Windstar

1 Answer

2000 ford winstar

Keyless entry, alarm and the radio quit working all at the same time none of the fuses seem to be blowed

Posted by on

  • Anonymous Mar 09, 2009

    my ford winstar the allterent went out then changed it now my radio wont work

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 232 Answers

In fords there two fuse boxes one inside the vehicle and another underneath the hood, the three components r all on the same circuit which is protected by a maxi fuse a fuse that is 40amps or better,. there is a main fuse that protects the circuit itself outside of the fuse for each different accessory. check all the fuses in the vehicle with a fuse tester or a test light.especially the fuse box under the hood close to the battery

Posted on Aug 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which fuse powers the power door locks on a 2012 equinox? None of the doors lock or unlock with the fob, battery ok


The Lock's lock from the door switches ? If they do it's not a fuse problem . Which of these does your vehicle have ?
Keyless Entry System Description and Operation (with Accessory 2 Way Remote)
Keyless Entry System Description and Operation (without Accessory 2 Way remote)

The keyless entry system is a vehicle entry device. The keyless entry system is used in conjunction with the body control module (BCM) to remotely activate certain vehicle features. Keyless entry will lock/unlock the doors/liftgate when a corresponding button on the keyless entry transmitter is pressed. This is accomplished by the transmitter sending a radio frequency to the remote control door lock receiver (RCDLR). The RCDLR interprets the signal and activates the requested function via a serial data message to the BCM. A low transmitter or vehicle battery or radio frequency (RF) interference from aftermarket devices, such as 2-way radios, power inverters, computers, etc., may cause a system malfunction. High RF traffic areas may also cause interference that could lead to a malfunction. Keyless entry allows you to operate the following components:
• Door locks
• Liftgate lock
• Vehicle locator/Panic alarm
• Illuminated entry lamps
• Remote vehicle start
The keyless entry system has the following components:
• Keyless entry transmitters
• Keyless entry antenna
• 2 Way Advanced Remote Start RCDLR
• BCM

Your best bet , take it to a GM dealer .

Jun 06, 2018 | Chevrolet Equinox Cars & Trucks

2 Answers

My 2004 v6 ford explorer won't start new batery and new starter no luck wont even click ?


Did you check the start relay for voltage? Ohms reading?

If I remember correctly the circuit goes like this:
Key turns ignition switch which puts voltage to the start relay which engages the solenoid.
So if it isn't even clicking and your headlights seem to be working fine then it is either the ignition switch or the start solenoid coil.
On older Fords the start solenoid used to be remote mounted on a fender. I heard newer Ford vehicles had it integrated with the starter like GM does.
A quick visual inspection will tell you which and where you need to look.
You might check if there is a fuse for that as well.

Apr 01, 2010 | 2004 Ford Explorer

1 Answer

Ford 2000 excursion keyless entry not working


look online or go to the dealer and find a reprogramming procedure.

Mar 12, 2010 | 2000 Ford Excursion

2 Answers

CLock, radio, dome lights, speedometer, keyless entry dont work


Check fuse 8 (10 amp fuse) in the under dash fuse panel. Make sure you have voltage to it on both sides of the fuse.This fuse feeds all of the items you listed.

May 25, 2009 | 1995 Ford Mustang

1 Answer

I don't know how to work my homelink on my chevy impala 2000


you have to set it through your radio for horn can blow when u use alarm

Apr 01, 2009 | 2000 Chevrolet Impala

2 Answers

1999 golf, alarm rings when open with key fob cant turn off


the alarm itself could have an internal earth problem.... pull out fuse from alarm or disconnect alarm and see if fuse still blows

Mar 21, 2009 | 2000 Volkswagen Golf

1 Answer

Stereo and clock quit working,the electric door locks only work when the car is running or the key is on, the alarm that sounds when you leave the lights on(and key is off)does not work and the keyless...


speaker noise in car at all times even with key off,Radio does not work,Goes away when removing radio fuse or power door lock fuse.Does not quit when radio is unplugged including speaker wires.

Sep 20, 2008 | 2003 Mitsubishi Eclipse Spyder

1 Answer

2000 ford winstar


CHECK THE MAIN FUSE IN THE FUSE BOX UNDER THE HOOD, USE TEST LIGHT TO TEST ALL FUSES

Aug 10, 2008 | 2000 Ford Windstar

1 Answer

Winstar wont start


THE THEFT ALARM WILL NOT ALARM THE VEHICLE TO CRANK OVER, ITS SOMETHING MECHANICAL JUST OCCURED AT THE TIME U INSTALLED THE RADIO, THE FACTORY SYSTEM IS BUILT INTO THE KEY FOR FORDS, TRY THE SPARE KEY,CHECK ALL FUSES UNDER THE HOOD AND UNDER THE DASH U MAY HAVE BROWN A FUSE AS WELL

Aug 05, 2008 | 2000 Ford Windstar

5 Answers

Mazda MPV 2000


Try "resetting" your keyless entry code. Which is a fancy way of explaining that I broke my keyless entry key fob and had to order a new one. It came w/ instructions explaining how to get the new fob to speak to the car's computer. It was weird (turn key on and off 3 times, open and close door three times, etc. **I'm sure my neighbors were watching and laughing**), but it worked. I'll scan and email you the insrtuctions if you wish. Dan: [email protected]

Jul 07, 2008 | 2000 Mazda MPV

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...