Question about 1999 Jeep Wrangler

1 Answer

MY HAZARD LIGHTS AND BRAKE LIGHTS ARE NOT WORKING

Posted by on

  • 2 more comments 
  • gwssmith1319 Nov 15, 2008

    My brake light, hazard lights, and signal lights are not working on 1990 Ford Taurus. But when i turn the switch for the hazard lights they do not work but it causes the signal lights to work.

  • cmhenderson Dec 26, 2008

    All my lights are working fine (headlights, turn signals and brake lights), but except for when I depress my brake pedal or turn on my hazard signal. Does anyone have a solution and the steps I should take to corrects problems?

  • debrigaud1 Feb 24, 2009

    I have a 2007 Jeep Compass my rear brake lights do not work - can you please advise solution

  • yadayada
    yadayada May 11, 2010

    Have you checked the fuse? they are on the same circuit, if the fuse is ok replace the turn signal switch

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with my 99 jeep. Turns out the turn signals, hazard lights and brake lights are part of the turn signal switch. I replaced mine and everything worked great.

Posted on Mar 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why aren't hazard lights or brake lights working?


Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

Sep 30, 2015 | Cars & Trucks

2 Answers

I have a 1989 ford f250 my hazard lights and brake lights don't work but my turn signal and tail lights do what could it be


Hi Jonathan,

I am not positive, but believe your Hazards work on the 'high' element of your tail lights, similar to how your brake lights do. Recall, when your lights are on, your brake lights are at normal illumination; when you press on the brakes, they're on their 'high' mode. If these high elements are burnt out, they won't illuminate; and accordingly neither may your hazards. Again, not certain on the hazards using the high element, but think so.

Good luck.

Feb 26, 2015 | Ford Cars & Trucks

1 Answer

Why won't my hazard lights work on my 1996 GMC Sierra pickup.


Do you have power in and out of the hazard flasher ?

Jun 15, 2014 | 1996 GMC Sierra

1 Answer

How can I test the multifunction switch?


Its possible both brake bulbs are burnt out.
Rare, but a wiring issue to both rears.
try the hazards. if the hazards are same as brake lights you are in luck to test alot. if the brake lamps light up with hazards then you know your multi function switchis bad.

May 07, 2014 | 2005 Pontiac Montana SV6

2 Answers

!997 Ford Thuderbird brake lights and hazards do not work


Lets start at the beginning.
The turn signals and brake lights use different fuses but both go thru the turn signal switch and use the same bulbs.
Have you checked the fuses for each circuit and does each switch have power in and out ?

Feb 03, 2013 | 1997 Ford Thunderbird LX

1 Answer

2011 Expedition left rear blinker light not working even after replacing bulb...also, brake bulb does not work with hazards, but does work with brakes and headlights...ideas?


In my experience, when the hazards are on, the brake lights are not supposed to indicate braking in this day and age of automobiles. In other words braking lights will not override the hazards when hazarding. I believe the 3rd or high mount brake light should work when hazarding and braking at the same time to indicate you are braking. I find it very seldom is there the need to drive and have the hazards on....in torrential rain going at low speed perhaps. Anyway, hope this was helpful. If not, I apologize.

Jan 10, 2013 | Ford Expedition Cars & Trucks

1 Answer

I have a 85 omni glh I blew my brake lights out I replaced the fuse but they still don't work , everything elae works on the car except the hazards , are the brake lights and the hazards connected...


yes they are. if your hazard flasher is bad and you happen to have the hazard switch turned on your brake lights wont work
put hazard switch in one position and check brake lights
then put in other position and check them
if they work with the hazard switch in one position leave switch olone and check fuses and put a new flasher for hazard in

Mar 24, 2010 | 1985 Dodge Omni

2 Answers

Bottom brake lights and hazard lights do not come on. All other lights work including top brake lights. Fuses and bulbs checked.


Check for power out of brake light switch by brake pedal. Of its faulty , the 3rd brake light will still work. Hope this helps

May 20, 2009 | 2000 GMC Yukon Denali

1 Answer

Brake lights stay on 2001 chevy s 10


There is a brake light swich along the brake peddle that need's to be adjusted. Quick and easy fix.

Apr 06, 2009 | 2001 Chevrolet S-10

Not finding what you are looking for?
1999 Jeep Wrangler Logo

612 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...