Question about 1995 Jeep Cherokee

1 Answer

FLASHING DIAGNOSTIC PANEL

THIS PANEL FLASHES ALL THE TIME, HOW DO WE SET IT, CLOCK, AND ALL THE OTHER THINGS THAT GO WITH IT.

Posted by on

  • LEVIMAN Aug 09, 2008

    no, I do not have a manuel, it is a used vehicle and we had it worked on and when they did- they said we would have to reset everything which is fine, but we can not figure it out, we have tried different ways with the buttons to no avail.

    thank you

  • yadayada
    yadayada May 11, 2010

    All that info is in the owners manual. Do you have one?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 60,667 Answers

Her is the item number of an owners manual on ebay for your SUV 380053166489 FLASHING DIAGNOSTIC PANEL - rtcurve.gif s.gif Just open ebay and type in the above number in search area, it will come up, right now it is at $9.99.
I tried to find a free PDF file to download of the manual, no luck, hope this helps. In newer cars and trucks with all there gadgets an owners manual is a must!

Posted on Aug 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does code 33 mean 2006 Grand Marquis airbag


Mercury Grand Marquis diagnostic code 33 Questions ...

www.fixya.com > ... > diagnostic code 33 > Cars & Trucks > Mercury
Mercury Grand Marquis cars & trucks diagnostic code 33 questions and ... 2006Mercury Grand Marquis air bag light flashes ... What does code po1151 mean.

2006 Mercury Grand Marquis air bag light flashes three ...

www.fixya.com/.../t19845434-2006_mercury_grand_marquis_air_bag_l...
Sep 3, 2013 - It then stay on. I assume - Mercury 2006 Grand Marquis question. ...What does a flashing air bag light mean on a 1993 Grand Marquis? Jul 23 ...

Mercury Grand Marquis airbag code 33 Questions ... - Fixya

www.fixya.com > ... > Tags > airbag code 33 > Cars & Trucks > Mercury
Mercury Grand Marquis cars & trucks airbag code 33 questions and answers. ... What does a flashing air ... 2006 Mercury Grand Marquis air bag light flashes.Missing: mean

Jan 11, 2016 | 2006 Mercury Grand Marquis

1 Answer

How to change clock


From the owners manual for the 2012 Impala Section 1-14.
(I have included a link from Chevrolet's website to the full manual)

Setting the Clock

To set the time for the Radio with

CD (Base):

1. Press the H button until the hour

begins flashing on the display.

Press H a second time and the

minutes begin flashing on the

display.

2. To increase or decrease the

time, do one of the following

while the hours or minutes are

flashing:

. Turn the f knob.

. Press ¨ SEEK or © SEEK.

. Press\FWD orsREV.

3. Press the H button again until

the clock display stops flashing

to set the currently displayed

time, or wait five seconds until

the flashing stops and the

current time displayed is
automatically set.

http://www.chevrolet.com/content/dam/Chevrolet/northamerica/usa/nscwebsite/en/Home/Ownership/Manuals%20and%20Videos/02_pdf/2k12impala.pdf

Mar 13, 2015 | 2012 Chevrolet Impala

1 Answer

Change clock on Pontiac g6


There is 2 different radios. With or without rds. Here are the instructions for both.
Setting the Time for Radios with Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.
To synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the clock button to enter the clock set mode, then press and hold the clock button for three seconds until UPDATED displays. If the time is not available from the station, NO UPDATE displays.
RDS time is broadcast once a minute. After tuning to an RDS broadcast station, it can take a few minutes for the time to update.
Setting the Time for Radios without Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes flash. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.

Mar 08, 2015 | Pontiac G6 Cars & Trucks

1 Answer

How to set the clock on a 2008 chevy cobalt


Setting the Clock (H-clock symbol, O-pwr symbol, f-music note symbol)
Without Date Display
AM/FM Base Radio with a Single CD Player
This type of radio has a
H
button for setting the time.
You can set the time by following these steps:
1. Turn the ignition key to ACC/ACCESSORY or
ON/RUN. Press the
O
knob, located in the
center of the radio, to turn the radio on.
2. Press the
H
button until the hour begins flashing
on the display. Press the button a second time and
the minute begins flashing on the display.
3. While either the hour or the minute numbers are
flashing, turn the
f
knob, located on the upper
right side of the radio, clockwise or counterclockwise
to increase or decrease the time.
4. Press the
H
button again until the clock display
stops flashing to set the currently displayed time;
otherwise, the flashing stops after five seconds and
the current time displayed is automatically set.
To change the time default setting from 12 hour to
24 hour, press the
H
button and then the pushbutton
located under the forward arrow label. Once the
time 12H and 24H are displayed, press the pushbutton
located under the desired option to select the default.
Press the
H
button again to apply the selected default,
or let the screen time out

Dec 27, 2014 | 2008 Chevrolet Cobalt

1 Answer

How to set the clock in my honda inspire 2005


Press and hold the H side of the bar until the hour advances to the desired time. Press and hold the M side of the bar until the minutes advance to the desired time. Press the clock set button, again to enter the set time. You may now set the time.------------------------------------------------------------------------------
Car Diagnostic Tools

Dec 11, 2012 | Cars & Trucks

1 Answer

My 2008 Ford Escape Owner's Manual says to re-set the clock just hold the "clock" button and the time will start flashing so you can then set it. This does not happen. If I recall correctly I...


Making sure the radio power is on,
To set the time, press

CLOCK. The display will read SET

TIME. Use the memory preset #s to

enter in the desired time, hours and minutes. The clock will then begin
from that time.

Nov 19, 2010 | 2008 Ford Escape

3 Answers

Airbag warning lights flashing on dashboard of mazda premacy 52 reg can I reset to clear these lights myself?


there are a quite a few problems associated with the airbag light flashing. The light will flash in long and short frequencies, this is a diagnostic code, e.g. two long flashes followed by six short flashes equals code 26, which is clockspring. Other codes are: 46 and 47 connector under seat, 3 power supply etc.

Nov 17, 2009 | 2002 Mazda MPV

1 Answer

I entered radio reset code for 2002 civic now the clock flashes and will not allow me to adjust it. How to solve this problem


Okay, I'm assuming that you were sucessful in resetting your radio code.
I'm also assuming that you have a CD player (which may not be the case).
The flashing clock also functions as an error code indicator. It should say something, indicating what the error is. You can't set the clock until the error is resolved (a disc stuck in the CD player, for example, on no disc in the CD when it's been told to play).
The procedure is as follows (which you probably know):
The audio system display usually shows the time when the ignition switch is in ACCESSORY (I) or ON (II). It shows the operation mode of the radio, cassette player, or optional CD player/changer when you operate them, then goes back to the time display after five seconds.
If an error occurs while operating the optional CD player or changer, the display will keep showing the error code and will not switch to the time display until the error is corrected. You can set the time only when the clock is displayed.
To set the hours, press the H (Preset 4) button while pressing the CLOCK (SCAN/RPT) button. Press and hold the H button until the hour advances to the desired time.
To set the minutes, press the M (Preset 5) button while pressing the CLOCK (SCAN/RPT) button. Press and hold the M button until the minutes numbers advance to the desired time.

If you don't have a CD player, or no error is showing in the clock read-out, leave a comment so I can investigate further.
Hope this helps you.

Nov 11, 2009 | 2002 Honda Civic

1 Answer

1985.5 PORSCHE 944 digital clock (changing time)


There are three buttons, let's call them 1, 2, and 3, from left to right.


Clock
Time setting

A. 12 AM, PM or 24.00 h
With the clock in the time readout mode, keep
button (2) depressed for 4 seconds -12 AM, PM
or 24.00 flashing. After pushing button (1), either
a 12-hour (AM + PM) or a 24-hour setting
program can be selected. If you only want to
change the display mode, push button (3). The
clock then returns to its normal timekeeping
function.

B. Hours
Push button (2) a second time - hour display
flashes. Set hour by pushing button (1). After
pushing button (3)*, the clock returns to the time
readout mode with new hour setting.

C. Minutes
Push button (2) once more - minute display
flashes. Set minute by pushing button (1). Upon
pushing button (3)*, the clock is started -
accurate to within 1 second.

Stop watch function
The stop watch can only be set in motion if the
clock is in its normal timekeeping mode and not
during setting operations.
A. Push button (3) - 00:00 display appears;
B. Push button (1) - stop watch is on;
C. Push button (1) a second time - watch stops.
(Additional times can be added by pushing button
(1) again - stop watch keeps running. Push button
(1) once more to stop timing.)
D. Push button (2) - 00:00 display appears;
E. Push button (3) - normal timekeeping mode.

If button (3) is pushed during operation A and
B, the setting procedure must be restarted
(push button (2)). icon_biggrin.gif

Apr 17, 2009 | 1985 Porsche 944

Not finding what you are looking for?
1995 Jeep Cherokee Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...