Trying to replace my window motor for my passenger side. Yea I'm working on string budget. I have bought the part and trying to remove the regulator from the old motor and attach the new on. Anyone here that could give advice.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had the same problem - driver side fine, passenger side front not working/slow or the back seat. You need to replace the window motor on the passenger side. Yes, there are two motors. It's pretty simple if you are handy with some tools. The hardest part is getting the 4 mounts that hold the window motor to the door off. The are factory riveted to the door, so I had to grind the outsides off and tap them out. Just watch the spring lever that holds the window bar for going up and down. I didn't pay attention and it snapped back - nearly broke my thumb.
Check the fuse under the dash. Did you replace the inline fuel filter? If not, you could loosen the line going into the filter then turn the key to the on position. The pump should run for about 2 seconds then the relay should kick off. Turn off the key for approx. 5 seconds then cycle key back on and the pump should cycle again. If you get a 2 second burst of fuel each time then the pump is cycling. Install a new fuel filter and check the grounded wire by the tank. Hope this helps. :)
Yes it screws in on right side of tramission and you will need a 7/8 inch deep socket to remove it. You may be able to clean the old one once it is removed. There is a little ball thatgets dirty and may you can get by with cleaning it. Good Luck. Ed
i own a 1991 chevy blazer myself but my problem is opposet of yours my back lights stay on well i went underneath the dash board an i look up underneath my steering column an i saw to components one was to my cruise control an the one in back of it was to my back lights an i moved this around an to my surprise my light swork good now but now my speed odometer doesnt not work an my gas gauge am my oil aa water gauge my power windows dont work an niether my a/c or heater defroster im jus wondering if i need to move this component alittke more to the left or right yesterday everything worked hmmmm