My Nissan Brake light switch is staying on. I tried to trouble shoot but cannot solve same. I am taking out the fuse for the circuit everytime I park to prevent battery from draining.
Can you help.
Re: Nissan Altima 1995 Brake Light swith staying on
I know this is outdated but for those with this problem which i had too, it is a rubber stopper that attaches to the brake pedel itself to keep the switch depressed on my car for there is 2 switches and there is 2 rubber stops attached to the brake pedal. this being gone will cause the brake lights to stay on all the time.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is a pressure switch under ur break pedal.it might come off happend on my altima i snapped in a penny and it solved it.switch needs to be pressed in inorder to turn the brake light off.good luck..
Lets keep it simple if the wiring harness is in good condition lets not look at that... first check your fuse if the fuse is good... check for power... if you have power coming and going from the fuse then check your brake switch ( located under the dash) attached to brake pedal. Please make sure your light bulbs are both good also. If your brake light switch is good and you have tried everything else it is either going to be in your 4 way switch or wiring harness
what that means is your socket is is probably shorted to your running lights there is a constant feed of voltage to that circuit. i would take a circuit probe and trace a wire to the spot of the short. good luck.
sounds like you got a faulty switch... even though it's new, take it back and try again. Sounds like the switch is stuck in the closed position. Disconnect the switch and make sure that makes the lights go out.