Question about 2002 Mazda Protege

2 Answers

Slipping transmission I am having trouble with the trani on the mazda it is slipping between 2 & 3rd and now it seems when I call on it it is slipping between each gear. I cannot find a place to check the fluid. Would it be I hope just the fluid or is it more serious?

Posted by on

  • Anonymous Mar 14, 2014

    My trany slips out of gear on my 2007 Mazda 3

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a 2002 Mazda Protege automatic, I has been slipping more so when it is warm up. No engine light detectedand it starts up fine. Just when I am riding it tends to jump in and out of gear. Last check, we were told that the trand oil level were fine. Can you tell me what may be the problem.

Posted on May 30, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 62 Answers

This is a manual transmission, right? In this case a slipping transmission will most likely be caused by a used up clutch plate. You need to replace it.

Posted on Aug 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trany does not go in to over drive. over drive light flashs. trany dont slip


Hi,
you need to get the transmission control unit reset, it must have a fault with it in the final drive control. Get it checked after it has been reset. You need a Diagnostic checker to reset it.

Jan 17, 2011 | 1999 Mazda Protege

1 Answer

I have a 2000 Jeep Grand Cherokee. I just replaced the transmission fluid in it and the filter as well, using the recommended fluid because the transmission was having a hard time going from 1st to 2nd...


They way you replaced fluid is bad, you should of done a bg service, by dropping the pan theres still oldoil ,the converter is full and the lines and the cooler and inside trany, then when new fluid is added the cleaners in it loosen all the dirt and seend it through the trany, the bg flushes 100% of the old fluid so no mixing of old contiminated and new oil is taking place.

Aug 29, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Transmission shifts in and out and speedometer goes up and down in a 1998 Chevrolet pickup with an 4L60E transmission.


Do you mean that the trani is slipping? If so you may be low on trani fluid, may have a clogged trani filter or need a rebuild or new one.
If you mean something else then let me know.

Apr 17, 2010 | 1998 Chevrolet K1500

1 Answer

2008 ford ranger 5 speed manuel transmission, ford has no replacement blocker ring for the trany. Further it has no part number in ford manual


Ford does not have a code number for the broken part, we are checking transmisson number to see when first manufactured. Further Mazda B-series trucks on 3000 use the same motor and transmission, will be checking there info. It seems at this moment this part has not been produced, a part was sent up from Ford , but with think it is automatic trany blocker ring, not manual. Apparently Ford has never replaced this part on a manual trany.. We have a picture of the inside of the tranmission and all the parts, but 4 have manufacture numbers are missing. This is very difficult. The truck is on warranty, so it is a Ford problem.

Mar 09, 2010 | 2008 Ford Ranger 2WD

1 Answer

I have a 1998 jetta, do I need to put transmission fluid in?.


they are sealed trani and yes if your trani slip you need to add trani oil that u get from the dealer only and ask for breakable seal with oil

Jan 12, 2010 | 1998 Volkswagen Jetta

1 Answer

My auto transmission is fime in gears 1 and 2 but


belt inside trany is slipping rebuild or replace trany

Sep 08, 2009 | Chevrolet Silverado 1500 Cars & Trucks

3 Answers

Automatic car won't shift from 2nd to 3rd, it just revs up


no you have a failed transmission on your hands, it is slipping.

Aug 13, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

When driving the transmission seems to get stuck


Check the trani fluid while running in park..
Trani fluid is messured in pints - not quarts.
Be careful not to over fill..
If the fluid is good - & still slipping - you need reani service..

Hope this helps !!
Rate me good ;o)

Jul 13, 2009 | 2001 Chevrolet Blazer

1 Answer

No lock up in transmission


When you find that it is the tps problem please change my ratting . thanks

Jul 10, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
2002 Mazda Protege Logo

765 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...