Question about 2005 Suzuki Swift

2 Answers

Key code problem

We have a 2005 Suzuki IGNIS. Have had no problems with it. Today my wife gets in the car and turns the key and the engine won't start. There's a symbol of a lock that comes up that -- according to the manual -- says that the passive theft lock is on becasue the car doesn't recognize the key code. This is the original key! I'm at work and cannot leave for another 4 hours. Is there any thing you can do to help?? This has never happened before.

This key -- the orginal -- is the one that HAD the auto lock function on it but about 6 months ago it fell off the key. Don't know how as I wasn't there.

Posted by on

  • Trishan Bahar Jan 28, 2009

    To all please help,

    I have a suzuki swift car.

    i have problem , starting the car with the original key.

    This key my son was paying and he threw the key. Then this key went in to pices.

    Some how i got managed to assemble , after this when i tried to start the car it was not starting. but the starter moter is turnning.

    In the same time i can see on the meter board a indicator is working with a car and a lock singn.

    Please help.


    Trishan .

  • Trishan Bahar Jan 28, 2009

    Dear All

    I have a problem on my suzuki swift car key.
    This was droped and gone in to pices.
    Some how i got managed to assemble and then i tried to start my car.
    It was not starting , but the starter motor was runing.
    Please help


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have a 2005 Suzuki IGNIS 1.3 auto. I have problems with it. when i drived about 30 minutes on the road, suddenly my car become slowly and eventhough i push speed paddle it still slowly after that the engine car will stop,

Posted on Nov 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Suzuki Master
  • 60,775 Answers

There is a sensor in the ignition lock cylinder that recognizes the key, they do on occasion malfunction, it reads either a radio signal or a resistance value from a chip in the key, If there was a remote attached to the key then that may well be the problem as well, why until now it didn't cause any problem is a mystery, but I still think that is what caused this, my car has a key like that, and if the the attached remote is removed my car will not start.

Posted on Sep 04, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What can i do to fix my petrol gauge read full all the time i have change sender unit and also in a dash board but still problem is there

we dont have ingis here. usa forum and country.
where are you, and the below shows the wild
variances by "COUNTRY"

some are a wild mix of
cruz , suzuki and holden parts
so, next time post country, be the first ever
and to get accurate answers just by that.....

Sep 01, 2015 | 2005 Suzuki Ignis 1.3

2 Answers

2005 suzuki ignis 1.3 would not start after it gets hot

hot soak failure.
all fails of this type are caused by only 3 things (4?)
1: lost electrical power to the EFI system, (kills spark/fueling)
2: lost spark.
3: lost fuel or too much called flooding

even a bad engine. some engines lose compression hot.
the tests have not changed since 1920 , tin lizzy days.
same deal.
3 tests.
ill not rattle through them here, its in everybook published on topic
and on every car repair forum , in the world.

Oct 10, 2013 | 2005 Suzuki Ignis 1.3

1 Answer

Suzuki Ignis gearbox problem, can not select first gear. Intermittent problem with first gear, sometime it clears by declutching a few times. Most of the time it is necessary to turn the ignition off to...

I have Susuki Ignis, 2004, 1.3L Engine, I have the same problem above , Automatic gear Test Give, Code P0705, which is refers to PNP sensors, Switch.. It gives all D,D2, L, P all off in test and shows the gear position on R what ever the real position of the gear lever is. gear selector PNP switch to be changed. We have no deales of susuki ignis in our country, and I need to requst this part from another Country, they Need the part No. I have send what I found on my existing selector, PBT-GF35, but , no use. If any body can help send me the Susuki Ignis STD Item No. Please

Aug 13, 2012 | Suzuki Cars & Trucks

1 Answer

I Lost the key of suzuki ignis1.3,so i need your help how to get the key....kindly help me

If you take that info to the dealer they may be able to cut you a new key.

Aug 11, 2012 | 2005 Suzuki Ignis 1.3

1 Answer

How d0 i change the clock time on my suzuki ignis vvt s auto1955

get in your owners manual if you don't have one contact your dealer they can order them for you

Jul 30, 2012 | 2005 Suzuki Ignis 1.5

3 Answers

When i am driving my suzuki ignis (1.3,manual,2001)in a traffic(more than 45 mins)engine starts to miss(check light indicates) and it stops.cant start it for about 10-15 mins

I have a 2001 Suzuki Ignis and I have a similar problem. When I start the engine 5 beeps are heard and the hazard lights turn off and on with each beep. Also after I have been driving for about 45 mins 3 beeps are heard and the hazard lights turn off and on again. However my engine does not stop running. I have asked people about it and they think that it has something to do with a lose wire in the security system? Any help would be greatly appreciated!

Oct 11, 2010 | 2001 Suzuki Swift

Not finding what you are looking for?
Cars & Trucks Logo

848 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides