Question about Toyota Pickup

1 Answer

Need wiring diagrams and locator for a 1993 3.0L 3vz-e

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Go to www.alldatadiy.com, find your exact vehicle for subscription purchase, and you'll have what you need. It's only 26 dollars for one year access.

Posted on Aug 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Specification for crank sensors and diagram for camry 3vz 6cylinder


This is a good engine, I have one myself, marvellous donk when you fix the oil leaks !!. The crank position sensor is on the distributor shaft and is fixed, so the only timing you have to worry about is the timing belt fit-up. Once those marks are lined up the actual ignition timing is done by the ECU. Details are here

http://yotarepair.com/3VZ-Etimingbelt.html

http://www.instructables.com/id/1994-Toyota-4Runner-V6-3VZE-Timing-Belt-Replacment/

If this does not answer the problem post a comment here and I'll scan some further pages for the 3VZ

The alloy block 1MZ is quite similar, details here

http://www.turboninjas.com/camry/eg2.pdf
.

Dec 09, 2016 | Cars & Trucks

1 Answer

Where is the pressure switch located on a 1995 V6 Toyota Camry


You would probably mean the oil pressure (or 'sender') unit. On the 1MZ alloy block V6 it is located on the front of the engine under the timing belt cover at about the level of the oil filter, below the alternator mounting. See here p140 (you don't need to do the large amount of disassembly shown in the diagram).

http://www.turboninjas.com/camry/eg2.pdf

On the older 3VZ iron block engine it is on the outside of the block right next to the oil filter, near where the dipstick tube goes down.
.

Jan 10, 2016 | 1995 Toyota Camry

1 Answer

Where is the knock sensor located on a 91 toyota 4runner with a 3.0 v6


which engine exactly????
The 3VZ-E

btw , the cam drive can make noise and make the sensor go nuts.
so we never just throw in this $185 sensors.
not ever.

FIRST GOOGLE HIT
http://www.yotatech.com/f2/knock-sensor-wire-3vz-e-34186/


OR ALLDATA.COM
OR ANY REAL TOY FORUM NOT , FIXYA.
OR THE REAL FSM SOLD BY HELM.
OR?

Post symptoms and ask for why it fails.

Feb 16, 2015 | 1991 Toyota 4Runner

1 Answer

I need a daigram of timing marks for v6 3.0 3VZ-E VZN


Here you are in "Office Supplies". But I recognize the V6 engine in a Toyota!

See here p45 and 51. The upper marks are the same in the 1MZ and 3VZ engines, and the dot mark on the 3VZ crankshaft sprocket is towards the bottom side, which is unclear in this diagram. Check there is the same number of teeth on the new and old belt.

http://www.turboninjas.com/camry/eg2.pdf

Sep 07, 2013 | Cars & Trucks

1 Answer

V6 timing belt


See here p45 and 51. The upper marks are the same in the 1MZ and 3VZ engines, and the dot mark on the 3VZ crankshaft sprocket is towards the bottom side, which is unclear in this diagram. Check there is the same number of teeth on the new and old belt.

http://www.turboninjas.com/camry/eg2.pdf

Aug 24, 2013 | 1995 Toyota Camry

2 Answers

WHERE IS NUMBER 1 PISTON ON A 1994 TOYOTA 4RUNNER V6 3.0 EFI. WANT TO MAKE TOP DEAD CENTER. SO AS TO MAKE SURE TIMING BELT IS IN PROPER PLACE.


Check this diagram location for 1994 Toyota 4 Runner 4WD 3.0 liter SOHC V-6 (3VZ-E)...

zjlimited_75.gif


Hope thos helps (remember to rate this answer).

Dec 27, 2010 | 1994 Toyota 4Runner

1 Answer

Location of thermostat,and a diagram.what thermostat should be used for new england winter.1989 toyota land cruiser


For 1989 Toyota Truck Land Cruiser 4.0L FI 6cyl, check this diagrams, according with your Engine Code...

zjlimited_179.jpg

Fig. 1: On, 3VZ-E engines the thermostat is located in the waterpump


zjlimited_180.jpg

Fig. 2: Exploded view thermostat and housing on the 1FZ-FE engine


zjlimited_181.jpg

Fig. 3: Exploded view thermostat and housing on the 2RZ-FE and 3RZ-FE engines


zjlimited_182.jpg

Fig. 4: Exploded view thermostat and housing on the 5VZ-FE engine


To install:
  1. When installing a new thermostat always use a new gasket. Be sure that the thermostat is positioned with the spring down or into the housing. On 3VZ-E engines, the jiggle valve (looks like a small rivet in the edge of the thermostat) must be at the top or 12 o'clock position.
zjlimited_183.jpg

Fig. 8: If used, the thermostat must be installed with the jiggle valve at the top


  1. Install the water inlet. Install the bolts finger-tight until the inlet is positioned exactly. Tighten the bolts to 10-14 ft. lbs. (13-19 Nm). Overtightening will break the ear off the housing and spoil your afternoon-don't do it.
  2. Install the hoses and wire connectors removed for access. Make certain the coolant hoses are not kinked or twisted after installation. Do not overtighten the hose clamps.
  3. Fill the cooling system with coolant.
  4. Start the engine and check for leaks. Top off any fluid levels.

About parts replacement, try to check in THIS SITE: Thermostat Universal

Hope this helps.

Dec 06, 2010 | 1989 Toyota Land Cruiser

2 Answers

1993 lexus 300 sc firing order and distributor cap diagram


Hello! If the engine in your vehicle is the 3VZ-FE...The firing order is 1-2-3-4-5-6...Distributor rotation is Counter Clockwise...

saailer_14.gif

If the engine is a 2JZ-GE...The firing order is 1-5-3-6-2-4...Distributor rotation is Counter clockwise

saailer_15.gif
Guru...........saailer

Nov 20, 2010 | 1992 Lexus Sc 300

2 Answers

Toyota surf v6 petrol 3vz-3 engine vacum diagram


go online type in toyota surf v6 petrol 3vz-3 engine vacum diagram

Sep 20, 2009 | 1986 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...