Question about 1995 Ford Explorer

1 Answer

95 explorer 4.0 4x4 goes into gear but will not pull in drive or reverse

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 91 Answers

Either your brake is parking brake is frozen, or you have a gear problem either in the tranny or the rear end. Does it work in 4wd, or do the rear wheel even spin.

Posted on Aug 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 Ford Explorer 4.0 tachometer goes backwards when I rev it up


Tachometer / Speedometer Problems: - Ford Explorer and Ranger ...

www.explorerforum.com > ... > Under the Hood

Jul 31, 2006 - 13 posts - ‎11 authors
Tachometer / Speedometer Problems: Under the Hood. ... upon restat the speedo goesto (is driven to) zero, the tach goes to ... 88 89 93 95 96 Aerostars ... in cold weather it seems to stick. but once the truck's interior warms up, .... 1995 Ford Explorer 4.0Automatic My Tach Quit Working And So Did My ... 5R55S harsh shifting; bump engaging reverse;
17 posts
Sep 3, 2011
Not starting - speedometer / tachometer needles going ...
3 posts
Jun 29, 2011
Tachometer Problem
12 posts
Nov 7, 2009
Solved 5R55E - No First Gear Problem
19 posts
Dec 7, 2000
More results from www.explorerforum.com

1999 Ford Explorer , Erratic RPM Problem - YouTube



Jan 01, 2016 | Ford Cars & Trucks

2 Answers

2002 ford explorer will drive forward but wont move in reverse...what could be the cause?


bad transmission. if it shifts through gears going forward but will not do anything in reverse it is most likely a bad transmission. reverse is usually the first gear that goes out .

Dec 07, 2014 | 2002 Ford Explorer

1 Answer

Reverse stopped working in 1998 ford explorer


reverse band in trans broke, will have to pull the trans and have it gone through,

Oct 15, 2014 | 1998 Ford Explorer

1 Answer

2000 ford explorer 5r55E stuck in second gear and all gear positions


It sounds like the linkages have let go. If this is the case, then drive it to a repairer straight away. If you turn the vehicle off you might not get it started again.

Oct 10, 2012 | 2000 Ford Explorer

1 Answer

Starts fine runs fine pull in gear it goes dead


Hi Brent: I'm no mechanic but I would look for a vacuum leak. I had a old car that did this to me. Started and idled strong but you couldn't put it in gear or it would die. After weeks of various male friends looking at it one finally found the problem. Turns out it was a vacuum leak or Vacuum Modulator. I found this page online that might help... It explains how auto trans work... etc. Hope it helps.

http://www.familycar.com/transmission.htm

Aug 11, 2012 | 1992 Ford Explorer

1 Answer

95 mustang v6 auto no forward gears but works in reverse had ****** rebuilt and same thing


Maybe your differential is shot and will only allow reverse spin or the transmission was not really rebuilt professionally. Was the transmission checked outside of your car after rebuild? Does your vehicle have a Powertrain Control Module (PCM)? Maybe the module went bad or faulty.

Jun 18, 2012 | Cars & Trucks

1 Answer

95 landrover disco has problem with transmission or transfer case. will move when I put it in Lock HI and Lock Lo but will not move when transfer case shifter goes to road gears in hi or lo and will whine...


Sounds as if the gears may be broken in the rear axle, the front axle will pull the car if in four wheel drive but when in 2 wheel drive only the rear axle pulls. Get the back tires off the ground and turn the rear end by the wheels. You may or may not hear any noise but if it is in park it you should feel some resistance if the gears are in good shape, will likely turn freely or lock up completely in spots if the gears are broken.

Sep 15, 2011 | 1995 Land Rover Discovery

1 Answer

When i put my 95 explorer in reverse it makes a grinding noise in transfer case and wont move all other gears fine


automatic or manual transmission? if manual then the first gear fork is bent if automatic then there is trouble in the valve body which means that you have to have the transmission rebuilt

Mar 05, 2010 | 1998 Ford Explorer

2 Answers

No reverse


sinc gear and or reverse it shot get new trans

May 31, 2009 | 1987 Dodge Ramcharger

Not finding what you are looking for?
1995 Ford Explorer Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...