Question about 1996 Nissan Pickup

1 Answer

Swirl Valve 1996 Pickup I received a code 1130 Can I replace the swirl control solenoid(s) without removing the intake manifold? And if I can how would I reset the Blackbox computer? -Thanks George

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have been working on a 96 nissan truck for three years for an evap code and swirl control , I finally just made sure the swirl control solenoid operated properly then disconnected the vacuum hose from the swirl control actuator and plugged it . code fixed.been driving 3 months, no code

Posted on Nov 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do i get a swirl valve on 2004 nissan sentra 1.8 litter i cant find a swirl valve online or dealer?????????????


the 2004 sentra
correct not listed as
Swirl control valve position sensor online
none on ebay etc
if no other nissan vehicle part listing
to suit the sentra

possibly discontinued part
might need to source a used one from a wrecker

P1137 2004 Nissan Sentra Description Swirl control valve position sensor is installed on the intake manifold.
The sensor is connected to the front end of the valve shaft of the swirl control valve.
The sensor responds to the valve shaft movement. This sensor is a kind of potentiometer which transforms the swirl control valve position into output voltage, and emits the voltage signal to the Engine Control Module (ECM).

Read more: http://www.autocodes.com/p1137_2004_nissan_sentra.html4bf6e106-b12c-4708-a0aa-a43a76b546c2.png26336927-ejqivawmtgcmwob5fqfu0osj-1-2.jpg

Nov 01, 2016 | Nissan Cars & Trucks

1 Answer

Have a code P1138 on 2003 Toyota Tundra - how do I fix ?


Swirl Control Valve Control System Performance Repair Importance Level: 3/3 Repair Difficulty Level: 2/3 Possible causes - Faulty Swirl Control Valve Control Position Sensor - Swirl Control Valve Control Position Sensor harness is open or shorted - Swirl Control Valve Control Position Sensor circuit poor electrical connection - Faulty Swirl Control Valve What does this mean? Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P1138 Description While idling and during low engine coolant temperature, the swirl control valve closes, Thus the velocity of the air in the intake passage increases, promoting the vaporization of the fuel and producing a swirl in the combustion chamber. Because of this operation, this system tends to increase the burning speed of the gas mixture, improve fuel consumption, and increase the stability in running conditions. Also, except when idling and during low engine coolant temperature, this system opens the swirl control valve. In this condition, this system tends to increase power by improving intake efficiency via reduction of intake flow resistance, intake flow. The swirl control valve is operated by the Engine Control Module (ECM).

Read more: http://www.autocodes.com/p1138.html

Oct 02, 2016 | 2003 Toyota Tundra

2 Answers

Code p01130


I've not had to deal with this on mine. However, what I'd check first is the vacuum hose that goes from the valve to the solenoid. If that hose leaks, you'll get that code. Here's some pics I got by Googling "p01130 nissan" http://www.infamousnissan.com/forum/showthread.php?t=25589 Good luck.

May 31, 2014 | 1996 Nissan Pickup

1 Answer

Code for 1996 nissan pick up p1130


P1130 Swirl Control Valve Control Solenoid Valve.

Oct 31, 2012 | Nissan Cars & Trucks

1 Answer

I HAVE A QX4 2000 MODEL.WHAT IS THE MEANING OF P1130 SWIRL CONT SOL/V ;AND P0443?


According to Nissan, each cylinder has a valve in the intake manifold to control the air volume in the intake. The code is for one of the swirl control valve solenoids.
Code 443 is for the EVAP canister purge volume control solenoid which is a part the computer uses to vent the gas tank.
I would recommend a shop for both codes.

Jul 05, 2012 | Cars & Trucks

1 Answer

How do i fix p1130 AND P 1440 code on my 2000 Nissan maxima? It takes about 5-6 minutes to crank up.


P1130 Swirl Control Valve Circuit Malfunction - With Automatic Transmission Possible Causes
  • Check for air leaks in the Air Induction system (e.g., in the intake manifold)
  • Check for leaks or looseness in hoses and tubes between the intake manifold, vacuum tank and swirl control valve actuator
  • Check for leaks or looseness in the hoses between the air cleaner assembly and the swirl control valve vacuum check valve
  • Crankshaft position sensor (REF) signal problem
  • MAF sensor has failed (it may be dirty or contaminated)
  • One-way check valve has failed
  • Swirl control valve actuator has failed (it may be damaged or sticking)
  • Swirl control valve control connector is damaged (check pins for damage)
  • Swirl control valve circuit is open, shorted to ground or shorted to voltage
  • Swirl control valve has failed
  • PCM has failed
  • Throttle position sensor has failed
  • Vacuum tank has failed

P1440...EVAP Control System (Small Leak)
Check your fuel cap & reset code,

Good luck, hope this helps,,,

Jul 15, 2011 | 2000 Nissan Maxima

2 Answers

Enciendo el auto y me encinde la luz de check y dice que es el codigo p1130


DTC P1130 - Swirl Control Valve Control Solenoid Valve

Otros detalles acerca de los codigos de falla los puede encontrar en este enlace: manual_detalle.php?manual_id=101

Buena suerte.

May 26, 2011 | 1996 Nissan Pickup

1 Answer

My 1996 nissan truck has a p1130 code where and what is a swirl control valve and how do you fix the problem.


The part is actually power acuator valve and its mounts onto the intake maniflold part number is 14517-86G01.

Jan 13, 2011 | 1996 Nissan Pickup

1 Answer

Engine code p1130


The code P01130 is your swirl control valve ,in intake manifold, helps air flow at idle for better combustion in cylinders helps emissions!
If it runs ok that's your call to fix it. could affect performance!

Sep 23, 2010 | 1996 Nissan Pickup

Not finding what you are looking for?
1996 Nissan Pickup Logo

1,171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...