Question about 1990 Ford Ranger SuperCab

2 Answers

Fuel line needs to be replaced but it's an obsolete part that I can't find anywhere. Can someone help me locate one for my 1990 ranger. I'm looking for the line that goes from the fuel filter up.

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that gotĀ 5 achievements.


    An expert who has achieved Level 3.


    An expert that hasĀ over 500 points.

  • Master
  • 398 Answers

Here is a shot in the dark. I am not familiar with how this line is made, but you may be able to take the old one to a parts house that makes up lines, and make you a new one. Just a suggestion, but it may work.

Posted on Aug 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try AMAUTO.COM, it is an after market auto parts dealer on line. I've used them twice, the second time was for the fuel line for a 1990 ford ranger truck for my dad, shipping is free for orders over 50.00, they ship pretty quick.

Posted on Oct 19, 2008


1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why does my 1990 ford ranger,after 10 miles,dies down & is hard toget to 40 mph

Catalytic converter/s. Did you replace the fuel filter also? If not, replace it. Not the problem though.

Apr 27, 2016 | 1990 Ford Ranger SuperCab

1 Answer

How do you remove the fuel line from the intake manifold on a Ford Ranger XLT with a 2.9 Litre engine?

Not sure what you are saying that broke.
If the line is plastic and the fitting has no place for a wrench, you use a tool made to release the spring tension inside the connector. AC lines use the same setup.
If the plastic line is broke, you may be able to get a repair kit at your local auto parts store. The fuel line is designed to be replaced all in one piece, not repaired.

Nov 25, 2015 | Ford Cars & Trucks

1 Answer

Where is the fuel pump on a mitsubishi van

In the 1995 version it was located in the fuel tank. There's a removable plate on the top of the tank that the fuel line comes from - remove that and the pump comes with it. 1990 could be different, trace the fuel line back from the carby. If you don't see a pump anywhere then it's in the tank.

May 27, 2014 | 1990 Mitsubishi Minivan

1 Answer

How to replace fuel filter on 1990 ford ranger

Locate the filter under the drivers door area. You will need the Ford quick disconnect removal tool(small round spring release button type tool) These hose removal tools are available at a parts store, You can get the "set" for around $20.00. A must have for the do it your selfer. When you have the tool insert the nose of the tool into the coupler on the end of the tube. (there may be a plastic retainer clip to remove first on the tank side of the filter, and a metal clip on the engine side.) When the tool is in place press toward the hose which you are removing and the coupler should dis-engage from the line. You may have to pull hard, and twist it a bit. The tool releases the push to connect mechanism inside to allow the hose to be removed.

Aug 21, 2010 | 1990 Ford Ranger SuperCab

1 Answer

1990 Ranger 2.9 runs pretty well until you shut it off and try to start it back. Smells like it is not getting fuel(real lean). Fuel pump and filter are new. What holds pressure to the fuel rail when off?...

nothing really except sometimes your fuel lines. you should have replaced the fuel filter when you replaced the pump so your pump lasts a lil longer. a clogged filter overloads the pump

Mar 21, 2010 | 1990 Ford Ranger SuperCab

1 Answer

Fuel filter installation on 1990 ford ranger xlt

It's on the driver side just behind the door. You need a special tool to pull the lines off of the existing filter. It seems to be a cheap simple tool. it slips over the line then you push toward the filter, it will click then you can pull the line off. Just pull the lines then replace with the new filter. The truck will start funny at first because it will be deprived of gas for a moment but then it should be fine.

HTH, Mike...

Dec 07, 2009 | 1990 Ford Ranger SuperCab

1 Answer

Stalls when in drive at stop

The fuel filter is located near the rear of the vehicle, forward of the fuel tank. Start from the fuel tank and locate the fuel lines, the fuel lines are about 1/4 inch in diameter. They usually run along the inside wall of the frame. Look for a component that looks similar to the picture below. It should also be noted that the direction of the arrow on the fuel filter should be pointing in the same direction of the flow of fuel. Please vote and rate this reply if you found this to be helpful.


May 13, 2009 | 1990 Buick Skylark

3 Answers

Replacing the fuel filter

check under the van on passenger side door track area

Mar 24, 2009 | 1990 Plymouth Grand Voyager

Not finding what you are looking for?
1990 Ford Ranger SuperCab Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides