Question about 1999 Jeep Cherokee

1 Answer

Gas gauge is not working - 1999 Jeep Cherokee

Posted by on

  • Monty11 Aug 11, 2008

    Fuel Gauge go's to FULL when running and is stuck there???

    'Jeep Grand Cherokee Limited 1996'

  • lindopark Oct 10, 2008

    On my 93 Yj......the gauge goes to the full mark and stays there even with the signal wire from the tank sending unit disconnected.......and that is after installing a new OEM replacement gauge........now tell me what is going on....?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sounds like you have a grounding problem... the gas gauge works off of resistince....if you ground the gas sender wires you should see the gas gauge drop.. if not check to see if it will drop closer to the gauge.

Posted on Oct 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 Mercury cougar gas gauge won't work


Cathy, 1996 Mercury cougar gas gauge not working. Simplest thing to check first is your fuel gage fuse, make sure all fuses are good. The ground wire could be corroded/damaged, sending unit in tank faulty, fuel level gauge in cluster faulty. All things can be tested by a good Tech.,diagnosed and estimate for repair.
1994 Mercury Cougar gas gauge don work
Ford Gas Gauge Does Not Work Help Blue Springs Ford Parts Blog
Diagnose Fuel Gauge

Aug 28, 2016 | Mercury Cougar Cars & Trucks

1 Answer

Where is the fuse for peril gauge in a Citroen c1


Find the problem? No separate fuse for the gas gauge, if the rest of dash and gauges work (the temperature gauge), not a fuse problem.


Take off the electrical connector at the gas tank, find the wire for the fuel sender unit in the tank to the gas gauge, and ground it temporarily to the car body, with the key ON. If the gas gauge needle jumps when grounding the wire, the gauge is good, and the problem is with the sender unit in the tank.

May 10, 2014 | Cars & Trucks

1 Answer

1970 Ford F100 Gas Gauge Not Working


It may be the sending unit in the tank that needs replacing. Here's how you can check: Turn the key on and disconnect the sender unit at the gas tank. Ground the sender unit's wire with a jumper wire from the truck's harness to ground. Watch the gauge. If the gauge on the dash is good, grounding the sender wire will cause the gauge needle to react and should move to full. This would indicate a new sending unit is required. If the gauge doesn't move when the sender unit is grounded, the gauge is bad and needs replacing. Pull the instrument cluster out to replace the gas gauge. Likely any old ford gas gauge might work-back then, there were not so many production changes.

Nov 14, 2012 | Ford Cars & Trucks

2 Answers

I have a 2000 buick Le Sabre. gas gauge does not work properly. i filled the tank and the gas gauge reads full. and it works properly past half. then it starts flucturating. i disconnected the gas gauge...


There are three possibilities. The gauge could be defective. The instrument panel voltage regulator could be bad or not grounded or (most expensive) it might be the sending unit.

Mar 11, 2011 | 2000 Buick LeSabre

1 Answer

Gas gauge dont work


sensor might be malfunction of the circuit might be disconnected.

Sep 19, 2009 | 1995 Honda Civic

1 Answer

Gas gauge does not work


was the gas tank empty or full some times the gauges won't work untill the tank is full or the wire for the gauge was not put on properly

Aug 18, 2009 | 2002 Chevrolet Cavalier Coupe

1 Answer

S10 gas gauge not working


you requirer anew fuel pump assyb the float is stuck

Mar 15, 2009 | 1999 Chevrolet S-10 Pickup

Not finding what you are looking for?
1999 Jeep Cherokee Logo

Related Topics:

956 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...