I have changed the starter switch cable, car would not start, Security light is blinking when key in the ignition. IT is in Park, when hot wire the starter car starts and shuts off.
Please help and thank you
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds like a bad connection somewhere, check the battery cable connections for corrosion and tightness, both ends. It could be the starter, starter solenoid, starter relay, neutral safety switch or ignition. Try moving the shift lever to the "N" position and see if that helps. When you say you have a dead key, do you mean you have no dash lights, (oil pressure light, battery light, things of that nature) no clicking, no nothing?
The security system has been activated call the dealer to getthe deatils on how to reset it, normally you pull the security fuse for 30 seconds to restet it. if that does not work call the dealer and they can help you.
Hello, you seem to have a problem with your anti-theft system the ignition lock cylinder has two wires that are very small and are common at breaking because every time the ignition switch turns the are being rocked back and forth, or either there is a malfunction in your key, but odds are you will be replacing the cylinder. You will also have to have a new key made.This fix is kind of exspensive so I would advise you to let the dealer do it. Besides when putting the switch in it could be possible to damage the new one so let them have that headache. Thank You
when u see the security light blinking and it wont start u simply turn the switch on and leave it on till the security light stops blinking then turn the switch off and start the car up
your key reader is not reading the chip in your key you can either replace the ignition switch cost about 250 dollars parts and labor or i can tell you how to bypass it for less than 20 bucks in premium chat hope this helps
thanks wes
did you already make sure the theft system is not triggered???? the security light will blink on dash, when the key is on. if blinking, email [email protected] for how to reset this.
×