Question about 2002 Oldsmobile Intrigue

1 Answer

Hi there. My car's signal lights will not work. We have checked the bulds and fuses and they are all in working order. A friend of ours told us it could be the Hazard light switch which also controls cruise control. Both the hazard lights and cruise control work though. Is there any way of finding out for sure before we purchase a new switch and find out that is not the problem? Thanks

Posted by on

  • 2 more comments 
  • dcw1215 Aug 10, 2008

    My 2002 Intrigue also has blinker issues. We realized that if we push in the hazard lights button a few times the blinkers will suddenly start to wrk. Thre is apparently a short somewhere. Yes the cruise and hazard lights work fine, but at times the blinkers will not. The only way we have found to make them work is to toggle the hazard button and eventually the blinkers work again. Yesterday my motor or transmission mount apparently broke. Now the car is making much noise. Anyone have a clue how much has to be removed before getting to the motor mounts? My good deal is turning into a nightmare! Ughhh~!

  • warends Sep 30, 2008

    We have also had the hazard /blinker light problem. Pushing in on the hazard button very hard to the right or left made the connection work again and we had to replace the turn signal lights often but have found that if we clean the connection and put the bulb back in they will work again, the bulbs are not actually burning out they just do not connect well.

  • buck50 Oct 08, 2008

    my cars turn signals work on and off. there will be stretchers were the turn signals work fine then all of a sudden they stop working. There are times when i use my turn signal and its blinking really fast, then it goes out. What exactly is the problem?

  • Anonymous Jan 17, 2009




1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Same thing with my 2002 intrigue, one night the turn signals stopped working. hazards worked. then after a few minutes they worked just fine. it has been about two weeks since and had no problems!

Posted on Aug 14, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Saab 9-3 99 dipped bulb is fine

their are two fuses for the headlights one for each side if i remember rightly so check the fuses if its not marked pull all the 10 and 15 amp fuses and check them

Jan 31, 2012 | 1999 Saab 9-3

1 Answer

My 199 Ford Expedition-Left turn signal and brake light in rear does not work. I had the buld changed last Sat. And it was working for almost a week...But now I was told by a friend that is not working...

It is very common for the light bulb socket to become minorly burned. You need to replace the socket. They are less than 10$. Hope this helps. TJ

Jul 29, 2011 | 1999 Ford Expedition

1 Answer

Directional Light Problems

Kindly check the below to find the solution
1. Check whether the Fuse wire broken in Fuse box.
2. Check the power supply in the bulb holder.
Thank you

May 08, 2010 | 2006 Ford F-150

2 Answers

Hi, found out i had no brake lights, bulbs and fuse good , all other bulbs work fine. thx

take out the bulb holder then have some one step on the brakes then pull on the black neutral wire like 1/8 of an inch and the buld will light up.

Oct 14, 2009 | 2002 Chevrolet Express

2 Answers

99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week's the board that the bulbs plug's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Oct 10, 2009 | 1999 Chevrolet Tahoe

1 Answer

2006 trailblazer low beam headlights are out, what could if be

did you take them off to see if they are burned sometimes when low beams go out hi beams still work try see if high beams work if they do need to replace light buld try that first if that dont work check your fuses.

Sep 24, 2009 | 2006 Chevrolet Trailblazer Ext

1 Answer

I have a 2003 Chevy Impala and the turn signal stopped working.

we had the same problem with our 2003 impala...took it to the shop and was told it was the hazard lights.

Mar 16, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
2002 Oldsmobile Intrigue Logo

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides