Question about Peugeot 306

1 Answer

Peueot 306 stalls for no reason

My 306 keeps stalling for no aparent reason. I have had three mechanics look at it. The last guy told me that there was absolutely nothing wrong with it. It only needs to be opened up on the motorway he said. I took it on the motorway and had trouble maintaining speed over 60mph.
I drive her around town mainly just to and from work.
Any suggestions?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Peugeot Master
  • 2,517 Answers

If it only stalls when you stop check the hose to the brake booster. They can crack and leak or it could be the booster itself.

Posted on Sep 15, 2017

  • Anonymous Sep 15, 2017

    Wrong answer

×

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 3 Answers

SOURCE: citroen picasso cutting out 60mph 30 mph!

under the ecu carrier there is a relay, that can cause this problem,
its about £20 to replace

Posted on Dec 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I picked up a 95 cavalier which stalled and now wont start


just change the sparkplugs ,wires and see ..not too expensive

Apr 16, 2012 | Cars & Trucks

2 Answers

Purchased a Suzuki Verona 2003 three years ago, and the car has been stalling and stalling and stalling and stalling for the last two years now. I have replaced o2 sensors at least 4 sensors in all and...


ours would also rev up and down,along with the stalling.had the wiring harness that runs on top of the engine replaced,took care of it.now we get to do the upper control arms,but we have 115k on the car now

Aug 25, 2010 | 2004 Suzuki Verona

2 Answers

I have a 99 Plymouth voyager 3.3 flex fuel which stalls constantly on initial take off only. had the crank sensor replaced twice. was previously getting po140 code which is o2 sensor which i havent...


Check the engine mounts. A friend of mine had a similar problem whereas acceleration caused a stall because the engine was rocking out of position.

Jul 27, 2010 | 1998 Plymouth Voyager

2 Answers

Car stalling and not restarting without jump


check your body grounds sounds like a lose conection and also check the connection at the starter seloniod!!!

Mar 05, 2010 | 1995 Buick LeSabre

1 Answer

2003 mazda mpv stalls several times while driving, all dash lights come on, need to coast to a stop, problem occurred once a week for three weeks and then happened three times within a mile, re-started...


i would ask the mechanic to check the ignition switch for pitting ....i had this problem with my honda accord for a long time until i finally just switched it for the second time and sanded it down to the point that it would touch but not keep contact to make the pitting .... hope this helped

Oct 29, 2009 | 1990 Mazda MPV

1 Answer

My vw beetle stalls out. the mechanic first told


If it was the mass air flow sensor, you will have a check engine light. The small rubber hoses connected to/from the mass air flow connector might have come loose or have a crack, which will cause compression to be too low. Check there before replacing the maf sensor.

Aug 10, 2009 | Volkswagen Beetle Cars & Trucks

1 Answer

2002 chrysler sebring, changed battery now car stalls


Mine did the same thing... Aparently there is a anti theft chip that causes this... You must make it to a highway/freeway or bout 25 miles of a maintained speed and allow the car to rset itself or its stall out city...

Jun 21, 2009 | Chrysler Sebring Cars & Trucks

4 Answers

My Neon keeps stalling at 4k rpm. will not run


Just to let you all know it ended up being the CENSOR in the trany that was bad.

May 28, 2009 | 1997 Dodge Neon

1 Answer

1999 3.8L V6 Firebird - Cyl 6 misfire, stalls at idle, hard start


look at spark plug 6 see if it is foul out with oil. when you first start you car up and it smokes blue you have leaking valve seals and stop up oil return holes.if all is good .check 6 injector make sure its getting power.

May 16, 2009 | 1999 Pontiac Firebird

1 Answer

2005 300c has 26,000 miles on it. When we fill it with gas it stalls. We do not overfill nor do we wait until the pump clicks off. We stop before that. Spent $600 with local dealer in May, filled it 6...


Same problem with my 2005 300c. It's happened five times to me, including stalling on the expressway. I looked at the posts. Too many differing views - without a real solution. Talk to three Chrysler mechanics and got three different "solutions." As much as I love this car (bought new June 2004), I'm ready to get rid of it and get a BMW or a Benz.

Aug 01, 2008 | Chrysler 300C Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

scj103

Level 2 Expert

99 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...