Question about 1989 Mazda 626

1 Answer

Hey there can any one help me to solve this problem please. Mazda familiar interplay 1989 has got a manual conversation but while i try to bleed the brakes,its fine as in the brakes are hard it fills normal while pumping and holding, but as soon as i turn the car on and go for a ride the brake paddle goes right in and the brakes don't work properly as while i was bleeding them...

Posted by on

  • Manicmazda Oct 14, 2008

    hello, im getting solid fluid when I bleed all brakes and the brakes are still not functioning like they should. When Driving if I pump the brakes about 5 times they build up pressure to stop. But They still go to the floor. Just would like to know what I can do next to solve my problem?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It sounds like your master cylinder is in need of replacement or rebuild. Unless you have an air bubble in the line somewhere (bleeding should have fixed that), you have a worn master cylinder that is cracked weak. There are various rebuild kits on the market with instructions.

Posted on Feb 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix...? how do I install crankshaft sensor for Mazda familiar zl engine please help


Mazda familiar is a ford mazda clone
hard to find the exact CAS you require online

in short ...its close to the harmonic balancer

26227379-ruh0it1i30kfmyinqfd3ogcx-3-0.jpg

Jun 28, 2016 | Mazda Cars & Trucks

1 Answer

Trying to find the transmission fluid dip stick on my husbands 323 mazda 1991 model sedan, have no idea where the user manual has gone, please help!! :)


ok , there is not dip stick on interplay engine. you can check from speed sensor. if you want to change or flushing the new one. please remove drain plug for go out oil from below. and than open speed sensor for filling the oil, but be carefully. because there are so many critical part (rotary pulse encoder speed).

please try
my number call +6281808024008

Jul 19, 2011 | 1991 Mazda 323

2 Answers

Clutch has no pressure, but no leaks.


That would be a pressure plate problem.

Jun 08, 2009 | 1989 Ford Probe

3 Answers

2004 mazda6 rear brake problem


Have you check to make sure the parking brake is adjusted properly?

May 19, 2009 | 2004 Mazda 6

1 Answer

1989 mazda 2600i starts when it wants


hey did you check your fuel filter?check your fuse box for bad fuse. check your coil see if you have fire then see if your getting fire from your distrib.let me now how you make out. have nice day

Mar 25, 2009 | 1989 Mazda B-Series

1 Answer

Trided everything why cant my brakes come on?


have you bleed them. (if you got air in the system this will definately be irritating to get rid off, takes a while to bleed if you did this )

Feb 05, 2009 | 1989 Mazda MPV

1 Answer

Mazda familiar interplay 1991 manual transmission


first of all
you never patch a clutch hose or brake hose.
ok what fluid are you loosing?
just find the leak and call your local auto parts store and get a hose and replace it. then bleed the system.
but remember ther always is a master and slave cyls in the system that can also leak.
good luck
paul

Oct 14, 2008 | 1991 Mazda 323

1 Answer

Help 94 mazda mx6 v6. wont start, got spark , getin gas, in time, need help please.


search for MX6 HEI conversion, should solve your problem for $50.
Ed

Sep 23, 2008 | Mazda MX-6 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...