Question about 1993 Toyota Camry V6

1 Answer

Need to find the thermostat in radiator - 1993 Toyota Camry V6

Posted by on

1 Answer

Ubicacion de termostato

Posted on Sep 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

If my top radiator hose gets hot but not my bottom one does this mean my thermostat is bad


I don't know how did you test your radiator but if you apply below steps you can clarify your problem easier.

If you want to test your radiator:
A) Park your car (it takes more longer to get real temperature values, if the car is moving)
B) Start the engine (don't forget to engage handbrake)
C) Wait around 10 to 15 minute
D) If your top radiator hose gets hot and bottom radiator hose gets warm; your radiator is functional. (In few minutes your radiator fan suppose to work)

If bottom radiator hose is still cold, it means there is a problem at thermostat. If you see any leakage at thermostat housing at the end of above step C, you need to renew thermostat housing gasket too. Even if you buy new thermostat, i suggest you to test it before assembly. If new thermostat doesn't open enough, your car may run so hot.

If you would like to test your thermostat:
A) Boil water in disposable bowl (thermostat may exposure chemical substances)
B) Put thermostat into boiling water.
C) If thermostat opens totaly, it is ready for assembly.

top-radiator-hose-gets-hot-but-not-3h5pkc2unruv115jj1tsixdi-5-0.jpg

Nov 20, 2014 | 2000 Jeep Grand Cherokee

2 Answers

Engine Diagrams


Hello. Here a non-photo diagram. Hope this helps!!!

The thermostat is located on the side of the water pump, the water pump is located just above the a/c compressor, the thermostat is fed coolant from the radiators lower radiator hose.
Thermostat :
1. drain coolant and tighten drain plug ( easier method : remove radiator cap, get big drain pan, place drain pan under lower radiator hose to radiator connection, remove clamp, slowly remove hose, allow coolant to drain into pan, now is a good time to remove radiator hose and clamp from thermostat housing )
2. remove thermostat cover / cap ( easiest to get at this when front of car is supported by jack stands and right hand side lower cover is removed ).
3. thermostat cap is held on by 3 bolts / remove thermostat.

You will notice that the thermostat's air bleed hole is pointing up and lines up with notch in water pump housing,,

ATTENTION :failure to install new thermostat in the correct location will cause engine to overheat.

1. install new thermostat to water pump, make sure air bleed hole lines up with notch, install and tighten bolts, install a new lower radiator hose, fill cooling system.

thermostat # 17670-77E00
lower radiator hose #17854-65G20
hose clamp #09401-36403
upper radiator hose # 17852-65G20

Suzuki factory manual

Oct 21, 2013 | Cars & Trucks

2 Answers

How to change a thermostat in mazda protege 2003


2_28_2012_3_28_55_am.gifThe lower radiator hose follow it to the engine block You woll remove 2 bolt 12mm or 14mm. there you pull out the thermostat. when you install you need a new thermostat gasket.The thermostat has a air bleeder nipple that has to be up. When you fill the radiator and you start the vehicle the thermostat will open up when it is warmed and coolant will sink down there you fill the radiator up always keeping you eye on the temperature gauge. Also fill the resovoir.2_28_2012_3_34_36_am.gif

Feb 28, 2012 | 2003 Mazda Protege

1 Answer

Where is the thermostat and how do i test it


follow top radiator hose it will take you to the thermostat housing.to check thermostat when engine is hot both radiator hoses should be hot to touch if the top radiator hose going to thermostat housing is cool not hot when engine is hot. the thermostat stuck closed causing engine to over heat need to replace thermostat and radiator pressure cap.when replacing thermostat make sure to pay attention to position of thermostat so you can install new thermostat in the same position.

Dec 10, 2011 | 1994 Volvo 940

1 Answer

My mechanic told me I had a radiator leak. I replaced the radiator. The car still overheats. I have talked to my mechanic several times and now he says I need a thermostat. Whay didn't he replace the...


the cooling systems consists of a radiator, radiator cap, water pump, thermostat, hoses, heater core and sometime a heater control valve that open water lines to heater core. You may need a cooling system flush if water pump, radiator have been replaced. flush the system.change the thermostat and have the heater core checked too if you can get to it.
does the cooling fan kick on to cool the radiator..check that too.replace radiator cap and check cooling fan yourself...let me know if need anything else.
Thanks for using fixya and please vote.

Jan 28, 2011 | 1999 Oldsmobile Aurora

1 Answer

How do you replace the thermostat


Partially drain coolant level to below thermostat level if nessasary. Follow top radiator hose over to engine. Where the top radiator hose stops at engine is where the thermostat is. Hose is connected to a pipe ( called a thermostat housing) that bolts to the engine. Remove components if they are in the way of accessing the two bolts or nuts that hold down the thermostat housing. Remove thermostat housing. Thermostat is under the housing. Replace thermostat and paper gasket or rubber o-ring. Be sure to clean surfaces of area where the gasket is mounted. Reinstall thermostat housing but do not over tighten the housing bolts or nuts. Reinstrall components removed and refill coolant to proper level. Do not forget to close radiator drain. Do not put radiator cap on at this time. Start engine and let run for a few minutes to get air out of system. Stop engine and refill coolant if needed. Install radiator cap and check coolant resevoir and fill to proper level if needed. Hope this helps.

Nov 26, 2010 | 2005 Pontiac Grand Prix

2 Answers

Location of thermostat


Instructions Things You'll Need:
  • Container
  • Jack and jack stands or wheel ramps (if needed)
  • Screwdriver
  • 13mm socket or wrench
  • Thermostat and gasket
  1. 1

    Turn the drain valve at the bottom of the radiator counterclockwise to drain the coolant from your Ford Taurus into a suitable container. Depending on the size of the container, it may be necessary to lift the front end of your Taurus with a jack and lower it onto jack stands, or use wheel ramps.

  2. 2

    Follow the upper radiator hose to the point where it meets the thermostat housing at the front of the intake manifold. Loosen the hose clamp and pull the radiator hose off the water connection on the thermostat housing.

  3. 3

    Take out the two bolts on the thermostat housing cover with a 13mm socket or wrench and remove the cover. Clean any old gasket residue from the inside of the thermostat housing cover. Pull out the old thermostat.

  4. 4

    Insert the new thermostat into the thermostat housing with the spring-side facing into the engine. Install the new thermostat gasket. Use a spray adhesive to hold the gasket in place, if desired.

  5. 5

    Reinstall the thermostat housing cover. Tighten the bolts to 89-124 in. lbs. Reattach the upper radiator hose to the thermostat housing. Make sure the drain valve on the radiator is closed.

  6. 6

    Fill the radiator with new or reserve coolant. Start your Ford Taurus and allow it to warm up to its normal operating temperature. Check hoses and connections for leaks and tighten hose clamps to stop any leaks, if necessary. Add more coolant as needed.

Oct 23, 2010 | 1999 Ford Taurus

1 Answer

Were is the thermostat located in a Pontiac Sunfire 2000?


Hi:
Your thermostat is located under the thermostat housing, which is what the upper radiator hose clamps to on the top of your engine. Basically, you need to start with a cold engine, drain your radiator, then unclamp the upper radiator hose from the engine. Remove the bolts from the thermostat housing, and gently tap on it to remove it. clean up the mounting surfaces on both the engine and the housing, and install a new thermostat, and new gasket. tighten to proper torque, reconnect the radiator hose, then refill up the radiator and cooling system.

Nov 24, 2009 | 2000 Pontiac Sunfire

1 Answer

How difficult to replace 1995 Toyota Corolla radiator/thermostat


You can replace the radiator yourself, but why do you need to? The thermostat is on the engine. Follow the large hose that goes to the engine block....not the water pump. The thermostat is under that or sits on the top of the engine....looking for a pic for you!

Mar 14, 2009 | 2005 Toyota Corolla

2 Answers

Need picture of jeep thermostat


sorry, thermostat and housing are on bottom radiator hose on 03 jeep liberty with a v6

Nov 21, 2008 | 2003 Jeep Liberty

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...