Question about 2002 Dodge Neon

1 Answer

Need to replace power steering sencer - 2002 Dodge Neon

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Not difficult to do. I had to do this for my 2002 neon. Go to your local parts store and buy a "power steering pressure switch"...should be around 20-25 dollars. It's located under the car near the driver side of the steering rack. All you need to do is unplug the wire, then use a 7/8" deep socket to remove the old switch. When installing the new one, use teflon thread seal tape on the threads and tighten snug but not too tight. Plug the wire back in and you're done. Afterwards, start the car and turn the wheel lock to lock a few times, then check for any leaking (the sensor itself can be seen from under the hood...look down behind the motor with a flashlight). Make sure the power steering fluid is at the correct level afterwards too. Good luck.

Posted on Apr 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Were is the speed sencer


If you follow this link you will see where the Speed Sensor is for a 1990 Honda Accord https://www.google.ca/search?q=1990+Accord+Speed+Sensor+location&safe=off&biw=1536&bih=682&source=lnms&tbm=isch&sa=X&ei=-bPaVMCbBIHwoASn9YGIDw&ved=0CAgQ_AUoAQ

Aug 18, 2014 | 1990 Honda Accord

2 Answers

I replaced the cooling sencer but still reading bad cooling sencer


you might have a bad wire harness from sensor to the computer. check the wires you might have a burned one or it is cracked. clear codes and try again.

May 27, 2012 | 1997 Jeep Grand Cherokee

1 Answer

Camshaft sencer


you have to remove the power steering pump,
1- remove the belt
2- turn power steering pulley to see hidden bolt behind the pulley
3- you do not need to move the hoses
4- there is a 10mm bolt hold the sensor,
5- after removing the bolt just twist back and forth to loosen it and pull it out,disconnect the wiring harness.

these are the price at rockauto.com
TANDARD MOTOR PRODUCTS Part # PC254T T-Series heart.png
us.gif ca.gif pc254t_primary.jpg$22.99
STANDARD MOTOR PRODUCTS Part # PC254 {#12567650, 24507588}
us.gif ca.gif pc254_primary.jpg$28.89
DELPHI Part # SS10044
us.gif ca.gif ss10044a.jpg$37.89
AIRTEX Part # 5S1239 {#12567650, 24507588, SU1368}
us.gif ca.gif 5s1239.jpg$38.79
ACDELCO Part # 213937 {#12567650}
us.gif ca.gif SENSOR,CM/SHF POSN213-937_primary.jpg$43.79
TANDARD MOTOR PRODUCTS Part # PC254T T-Series heart.png
us.gif ca.gif pc254t_primary.jpg$22.99
STANDARD MOTOR PRODUCTS Part # PC254 {#12567650, 24507588}
us.gif ca.gif pc254_primary.jpg$28.89
DELPHI Part # SS10044
us.gif ca.gif ss10044a.jpg$37.89
AIRTEX Part # 5S1239 {#12567650, 24507588, SU1368}
us.gif ca.gif 5s1239.jpg$38.79
ACDELCO Part # 213937 {#12567650}
us.gif ca.gif SENSOR,CM/SHF POSN213-937_primary.jpg$43.79




2007-02-25_171731_cam_sensor_93_3.1.gif

/uploadswith image

May 21, 2012 | 1999 Chevrolet Lumina

1 Answer

No blown fuses/new coil ,cam sencer,crankshaft sencer but no power to my coil ...how can i get power to my coil so i will get spark


tim hodge63, Chrysler uses what is called an ASD (auto shutdown relay) relay. This relay powers the coil, injectors and the alternator. You can find it in the power distribution box (fuse box) located in the engine compartment. Replace the relay and power should be restored to your coil. Good luck with this.

May 14, 2011 | 1995 Dodge Dakota

1 Answer

Code 17 states that my speed sencer has gone bad. where is my vehical speed sencer?90 honda accord EX


On the back of the transmission near your thermostat housing. Move your air intake tube and you'll see it down there. There will be two rubber power steering hoses running to it and a plug & wires.

Jun 08, 2010 | 1990 Honda Accord

1 Answer

I need to order a clockspring. What the best site and do you know the price of the item.. Thanks


i am going to shoot in the dark here clock spring=srs sencer in the steering wheel,
you can get them from the junk yard for around 50 if you can find one that will sell it to you,

Apr 16, 2010 | Mitsubishi Diamante Cars & Trucks

1 Answer

Runs rough too rich replaced oxy. sencer &temp. sencer.1987 suburban 350 .thinking about changing maps sencer next


That may help. Also check for fouled plugs. Also check the fuel pressure regulator on fuel rail, check for vacuum at the regulator.

Mar 06, 2010 | 1987 Chevrolet Suburban

2 Answers

'03' Vue has trouble starting


Sounds like the fuel pump may be going out. By the way the power steering is electric in Saturn, so it does not require the engine to be running.

Sep 11, 2008 | 2003 Saturn VUE

1 Answer

Front and back speed senors


their should only be one speed sencer its in rearend on top of center housing most of the time its garbage getting on sencer its a magnetic sencer pickes up debre in fluid recomend fluid change when change sencer

Aug 01, 2008 | 2000 Ford Excursion

Not finding what you are looking for?
2002 Dodge Neon Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...