Question about 2000 Nissan Xterra

1 Answer

Hi: I have problem with the cooling fan tha do not turn on. I Had proved the fan continuity that its ok. I had proved the relay and appear ok. Ground its ok. What more to do. my vehicle is a xterra 2001.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 334 Answers

HAVE YOU RUN DIRECT POWER TO FANS TO PROVE THE WORK??????

Posted on Apr 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the fuse for motor fan in uplander 2006?


there is 2 fuses that you have to check
one will be in the big fuse assembly in the engine bay, the other probably in the fuse assembly in the cab
If they prove ok then it is possible that the coolant temperature SENSOR is faulty and needs replacing
don't confuse it with the temperature sender which operates the temp gauge.

Aug 10, 2015 | 2006 Chevrolet Uplander

1 Answer

Fan relay switch


The fan relay could be defective, especially if the fan continues to run after shutdown and drains the battery.

Nov 14, 2013 | 2007 Chrysler PT Cruiser Touring Hatchback

1 Answer

Cooling fan does not run?


At the main fuse and relay box, check the 30A EGI INJ fuse. If OK, the main relay closes to apply power to the cooling fan relay. Next, check the 30A FAN 1 and FAN 2 fuses.If OK, power is being applied to the fan control module. The PCM processes engine coolant temperature sensor input and sends a signal to the fan control module which, in turn, causes the cooling fan motor to operate. Fan failure could be caused by malfunction of the cooling fan relay, the fan control module, the engine coolant temperature sensor, the cooling fan motor itself, or the PCM

Oct 06, 2012 | 2005 Mazda MPV

1 Answer

2000 grand am gt over heating radiator fans not turning on


Overall Cooling fan operation is managed by the powertrain control module (PCM). Three relays control fan motor operation. In the underhood junction block, the 30A COOL FAN 1 fuse feeds power to (left) fan control relay 1; 15A COOL FAN 2 fuse feeds power to (right) fan control relay 2. The mode control relay determines whether the left fan, the right fan or both fans are turned on. If the two fuses are OK, the problem is a defective fan relay(s) or the PCM

Sep 28, 2012 | 1999 Pontiac Grand Am GT

2 Answers

The electric fan is does not seem to be engaging at low speed causing the engine to overheat when the A/C is on... the engine fan starts and stop irregularly when waiting for the engine to cool down... is...


Hi!!

There should be a fuse/relay box in the engine compartment close to the battery, If your vehicle is equiped with two fans, there should be two relays. There has to be a cooling fan(if equiped with two) that comes in as soon as you turn the A/C on, is your vehicle has one fan, it has two speeds, when the A/C is turned on, the Hi speed kicks in. Sensors in this circuit that are relevant to this function are, Coolant Temp. Sensor, Engine Temp. Sensor.

Check fuses/relays for the cooling fan(s), if OK, check sensors.

Good Luck!! Don't forget to rate this post!!!

Aug 16, 2010 | 2003 Jaguar S-Type

3 Answers

The fans are continuing to run after the car is turned off


thats supposed to happen, its cooling your car down..it will shut off once the car is cooled down

Dec 01, 2009 | 1996 Ford Taurus

1 Answer

I'm trying to find out how many cooling fan relays are in a 1999 Ford Taurus SE with the 3.0L Vulcan OHV engine. This model year has done away with the CCRM (Constant Control Relay Module), so the relays...


fuse #9 protects the 2 cooling fan relays.

It looks like the hgh speed cooling fan realy is in a thin box mounted sideways between the battery and fender.

It has high speed relay, autolamp relay, autolamp headlamp relay, horn relay, washer motor relay, wiper hi/lo relay, wiper park relay.

Section 03-03: Engine Cooling 1999 Taurus, Sable Workshop Manual
DESCRIPTION AND OPERATION Electrical System NOTE: With A/C ON, the cooling fan motors will run continuously. Cooling fan motors will not cycle ON and OFF with A/C clutch (2884) .

NOTE: An exception to this is when vehicle speed is over 61 km/h (38 mph) and coolant temperature is below 100°C (212°F), and A/C head pressure is below 1.71 MPA (250 psi). The cooling fan motors will then automatically shut off.

The cooling fan motors are mounted within a fan shroud (8146) behind the radiator (8005) .

Engine Cooling Fan Control CCRM Applications The PCM monitors certain parameters (such as engine coolant temperature, vehicle speed, A/C on/off status, A/C pressure, etc) to determine engine cooling fan needs. The PCM controls the fan operation through the Fan Control (FC) output (single speed fan applications) or the Low Fan Control (LFC) and High Fan Control (HFC) outputs as shown in Table 2. Although the fan control (FC), low speed fan control and high speed fan control relays are normally open relays, the FC/LFC circuit is wired through a voltage inverter inside the CCRM. The voltage inverter ensures that the PCM must turn on (ground) the FC/LFC output to turn the fan off. This is done so the cooling fan will operate in the event of an open FC/LFC circuit.

Stand-Alone Fan Control Relay Applications The PCM monitors certain parameters (such as engine coolant temperature, vehicle speed, A/C on/off status, A/C pressure, etc) to determine engine cooling fan needs. The PCM determines engine cooling fan control requirements and controls the fan operation through the Low Fan Control (LFC) and High Fan Control (HFC) outputs (Table 3).

Jun 29, 2009 | 1999 Ford Taurus

1 Answer

1990 BUICK CENTURY RAD.COOLING FAN RUNS ANYTIME KEY IS ON.


If you have changed out the relay, and disconnected the temp cooling sensor, make sure you have replaced the correct relay; I believe there is one bank of four relays located by the passenger side head lamp. If the fan is running continuously, then I would say the relay is stuck in the closed position, resulting in completing the electrical circuit, powering the fan. Have the new relay tested. You can find a wiring schematic in the Hanes manual for your make and model.

May 08, 2009 | 1990 Buick Century

Not finding what you are looking for?
2000 Nissan Xterra Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...