Question about Chevrolet Silverado 2500

Open Question

How to replace a starter on a 04 chevy 2500 truck

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 37 Answers

SOURCE: I replaced starter on 2000 chevy truck now I have

maybe grounding out and blew fuse. The exhaust shield can do this if installed backwards. www.okctransmission.com

Posted on Dec 30, 2009

Ad
duane_wong
  • 6826 Answers

SOURCE: 2005 chevy 2500 starter is

Do you mean the starter spins but doesn't seem to be engaging with the flywheel's gear? If this is the case, the solenoid is sticking physically in its chamber. So, the solution is to change the starter and get a new solenoid with on it that will work better.

Good luck on this repair.

Posted on Nov 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

04 Chevy silver 2500 HD won't crank. New starter battery checked out good


Check all your fuses and also the starter relay, are you getting power to everything else? Are you hearing the fuel pump spin up when you first turn the key to the on position? If you can borrow or buy a OBD2 /CAN scan tool and check to see if there is any codes for crank sensor, or cam sensor.

Sep 28, 2014 | Cars & Trucks

1 Answer

2005 chevy silverado 2500 HD starter won't engage


The pinion gear could be jammed in the ring gear but if you have considerable mileage on the starter and everything else checks good you could be due for a starter replacement

Feb 25, 2013 | Chevrolet Silverado 2500HD Cars & Trucks

1 Answer

I have an 03 chevy 2500 & I had to replace the


some cars and trucks have the engine size under the hood. When you open the hood and look up it is usually posted on a little white tab

Sep 16, 2012 | Cars & Trucks

1 Answer

How do I replace a starter on a 1993 chevy pickup truck


You'll want to disconnect the positive battery cable from the battery. Remove the 14mm or 15mm nut holding the battery cable to the starter, and the 8mm nut holding the small wire to the starter. Remove the 2 14mm bolts going up thru the starter, into the block.

Jun 13, 2010 | 1993 Chevrolet C/K 2500

1 Answer

I have a 95 chevy c/k 2500 pick up that won't turn over just clicks - what could be the problem?


Either the battery is too dead to turn the starter or the starter could be bad.

May 17, 2010 | Cars & Trucks

2 Answers

2002 chevy van 2500 when i turn key to start van


Fuses only blow if-Old,Overheated or you have a Short circuit.
That should be any easy fix,to the extent that there aren't many 40 Amp Fuses and you will need a wiring diagram to follow the problem from the fuse to the cause. If you know what fuse it is, you can guess,but I wouldn't recommend that,it will be time consuming and maybe costly ,if you don't have a test procedure to follow and throw parts at it.
Don't replace the fuse.Their expensive and will keep blowing.

May 05, 2010 | 2002 Chevrolet Express

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...