Question about 2004 Jeep Wrangler

2 Answers

I have a 2004 Jeep Wrangler with 43000 miles, when I go to start it, it doesn't click, and the engine doesn't start, all the lights work, the radio works, everything works. I tried to jump start it that didn't work, so we pushed it down the driveway and popped the clutch it started first try. Do you have any ideas what the problems could be?

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

You need to check the starter, clutch switch and the starter relay. Make sure all grounds are good as well. Ignition switch could be bad but that's rare.

Posted on Apr 11, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

Check your battery charge level, fluid level (if possible), cable connections and cable condition. Lights, radio, and other accessories draw MUCH less than the starter, so they will often work even when the battery is too low to spin the starter. Corroded connections and/or frayed or loose cables will not let enough current pass to spin the starter.

Posted on Apr 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Jeep Wrangler the radio went dead but cigarette lighter works and fuse is ok. The next day the check engine light came on. Any idea what is going on


radio dead, that means no sound or nosound nor dial data?
does the am/fm and cd all fail, using real CDDA disks(store bought)
? if the radio is totally 100% dead that is lost power to radio.
fuses or lost ground to the radio.

the check engine light means one thing,.
get the car scanned, 1996 to now, all cars USA.
you scan it, they scan it.
i take it car starts and drives perfectly?
head lights work> and all outer things?

Jul 04, 2016 | 1998 Jeep Wrangler

1 Answer

05 jeep wrangler wont start,has power to lights radio,battery good starer good.when you try to start inst.cluster does not come up.


check your engine block ground or the battery ground make sure the engine is properly grounded or is still grounded

Jun 19, 2012 | 2005 Jeep Wrangler

2 Answers

My check engine like came on i filled up jeep with gas put gas cap back on till it clicked drove my jeep to work about 22 miles on my way home it came on it go's back off in a week or so this is the 2x...


Hello schuetzbrn

I would strongly suggest that the next time this happens to you, go to Autozone and ask them to scan your Jeep for the code. this will be your best bet at knowing what it is and what to do next. Go from there. it shouldn't be a major problem if the engine light doesn't stay on.

-hopeufixit-

Jun 02, 2011 | 2005 Jeep Wrangler

1 Answer

When turning key on will not start all the time all gauges and radio work 2004 jeep wrangler


Have you checked your ignition coil and starter? If you have good battery and you can hear the starter turning but the engine itself wont turn over than you have a possible frozen engine? Check the block to see if it cracked? Check to see if you have an oil leak from the head gasket? Also if it has overheated this will also cause the engine head gasket to blow and seize up.

May 15, 2011 | 2004 Jeep Wrangler

1 Answer

My 1994 Jeep Wrangler: Upon starting the Jeep, the check engine light has been coming on. Sometimes it is on upon starting the engine and sometimes it will not come on until a few miles or so down the...


Try replacing Co2 sensor, most people don't realized that unit need replacing every 50-75k miles also. if that does not work, take it to the dealer and have them plug it into the computer, that will allow for them to narrow it down. with service engine light on, it will effect some of your gas mileage and the performances. The dealer charge somewhere around 50 bucks to diagnose using their computer, however 50 bucks will appilied toward the repair bill if they do the work.

Nov 24, 2010 | 1994 Jeep Wrangler

4 Answers

2006 Jeep Wrangler won't start


First, make sure you can turn the engine by hand. If you can't then the starter can't turn it either. Have someone else turn the key and look for the source of the click...may be a relay. Go over the starting circuit with a volt meter. Check for power at the starter main terminal and then with the key turned to "start" check for power at the trigger terminal on the starter. Check battery voltage and check relay operation.
You have a neutral safety switch on the transmission if its an automatic and a clutch switch if it's a stick. Check them as well. Make sure battery grounding on fender and block are also clean and secure.

Oct 01, 2009 | 2006 Jeep Wrangler

1 Answer

Code scan: P0301 Cylinder 1 misfire detected


Code P0301 is a generic OBD Code for Misfire. It also indicates you have a misfire in the #1 Cylinder. I would start by checking the plug wire to make sure its clean and on all the way (at the coil as well). Then if that doesnt help I would pull the plug out and check the condition of the spark plug. hopefully this will give you some direction. Thanks for Using FixYa!

Sincerely,

JC

Dec 03, 2008 | 2004 Jeep Wrangler

2 Answers

2004 jeep wrangler


Clean the inside of the MAF sensor with MAF sensor spray, it is made bt CRC.

Oct 20, 2008 | 2004 Jeep Wrangler

2 Answers

2004 jeep wrangler 2.4 litre 4 cylinder


check the ground wirea at the dipstick tube,remove them all,and bend the ends of the wire,look for weak or broken wires, i bought several 4 cyl jeep that had problems at shift, fall on their face < after the engine settled back in to place,so wires made contact> just a thot. the ground wires are small the engine moves,when shifting.

Jul 29, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
2004 Jeep Wrangler Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...