Question about Mazda MX-5 Miata

Open Question

I need to replace the drivers side door mirror on my Mk1 Mazda MX5

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

leetamara
  • 702 Answers

SOURCE: REPLACING DRIVER'S SIDE MIRROR ASSEMBLY

If you remove the door panel, you'll see the screws that hold the mirror on. Remove them and the mirror will come right off.

Posted on Jul 03, 2008

  • 548 Answers

SOURCE: How to remove door card on MX5 (2002)

Get a trim removal tool to use in pulling the door panel off. You will have to remove the screws under the arm rest as you find them. I would start at the bottom of the door and work up. You may want to assume that the work will progress better if the window is down before you begin. Mind the door handle as you remove things as the biggest complaint I've seen is that it fails to work right on the first try after getting things put back. Keep a magnet that has a telescoping arm handy to pick up things that fall to the bottom of the door. To remove window crank handles if you have them, put the trim tool behind the handle and engage the wire clip to remove it.

Posted on Jan 08, 2009

MNfisherman
  • 11896 Answers

SOURCE: Replacing the Mirror Light - driver's door

Remove or disconnect the following:

  • Disconnect the negative battery cable.
  • The mirror inside cover trim
  • The door panel
  • The electrical connector to mirror motor
  • The nut attaching mirror assembly to door frame
  • The outside rear view mirror
  • e7dfc8d.jpg
Removing cover trim and nut
1adc7b1.jpg
Removing cover trim and nut

Posted on Jan 24, 2009

  • 69 Answers

SOURCE: How to remove/replace driver's side mirror on 96 blazer

remove door panel.. there should be access hole to get to the bolts.

Posted on Jul 31, 2009

  • 107 Answers

SOURCE: how do you replace mazda mx5 wing mirror have took

There should be screws hidden underneath the cover at the base of the mount for the wing mirrors - if you look around the cover, you should be able to pop it off and get at the screws.

Posted on Jan 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the recommended tyre pressures for a 2004 mk2 Mazda mx5?


on the decal on the door pillar drivers side
talk with a tire retailer as they have the pressures for the brand of tire you are using

Apr 26, 2017 | Mazda Cars & Trucks

1 Answer

Replace rear vision mirror passenger side mazda 323 astina 2002


on the inside of the door above the door panel hinge side is a plastic cover almost triangle shape use flat screw driver to carefully pry off and the mirror mounting bolts will then be accessable

Jul 23, 2016 | Mazda 323 Cars & Trucks

1 Answer

I have an Mk1 Mx5 and my popup lights were working fine till last week, were only one (drivers side) comes up. I can pop the hood and fiddle with the manual light raiser and then it starts to work but its...


Lubricate all the rods and connections you have so there is not as much friction.

The headlights in a Mazda Miata are generally of two types. Some Miatas use the factory "flip up" style headlights, where a motor raises and lowers the headlight assembly out of the front bumper area. When this motor fails or when the headlights are not working properly, you'll need to replace the failed component. Replacement headlights are normally available from Mazda or from most auto parts stores if you need to replace the entire assembly. However, before you replace anything, you need to troubleshoot the problem. check for debris in the path and any loose or frayed wires.

Unfortunatly there is no adjustments, probably a weak motor.

If this was helpful a vote with the thumbs up would be appreciated for the advice.

thanks

Apr 08, 2011 | 1995 Mazda MX-5

1 Answer

Gearbox oil capacity of mx5 mk1 1800cc 5 speed


4.2 Pints for a 1997 Mazda Miata, but that's for the U.S. MX6, I believe.

Sep 18, 2010 | 1997 Mazda MX-5 Miata

1 Answer

How do you replace mazda mx5 wing mirror have took door panel off no bolt


There should be screws hidden underneath the cover at the base of the mount for the wing mirrors - if you look around the cover, you should be able to pop it off and get at the screws.

Jan 15, 2010 | 1997 Mazda MX-5 Miata

1 Answer

My mazda mx5 mk1 has suddenly started to shudder heavily while driving from the rear end what would cause this?


worn bushings,worn shocks, worn wheel bearings loose wheel nuts,loose suspension components are just some of what may cause the rear shoddering

Sep 16, 2009 | 1991 Mazda MX-5

1 Answer

Mx5 Mk1 Leaking roof


sounds like u have a bad window seal

Aug 31, 2009 | Mazda MX-5 Miata Cars & Trucks

1 Answer

MX5 (2006) replacing wing mirror


at the top of the door pull handle there is a cover over a set screw. do not pull on the door to hard or you will break it and then your door panel is no good. you must remove the little cover at the top, just gently pry it of with a screw driver and remove the screw underneath.

Jul 12, 2009 | 2002 Mazda Miata

1 Answer

How to remove door card on MX5 (2002)


Get a trim removal tool to use in pulling the door panel off. You will have to remove the screws under the arm rest as you find them. I would start at the bottom of the door and work up. You may want to assume that the work will progress better if the window is down before you begin. Mind the door handle as you remove things as the biggest complaint I've seen is that it fails to work right on the first try after getting things put back. Keep a magnet that has a telescoping arm handy to pick up things that fall to the bottom of the door. To remove window crank handles if you have them, put the trim tool behind the handle and engage the wire clip to remove it.

Jan 08, 2009 | 2002 Mazda Miata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...