Question about 2002 Pontiac Firebird
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It is easy if you have the tools. you need a steering wheel puller and a spring compressor for the plate under the wheel. a bunch of screws and turn signal switch and hazzard switch you can gain access. Remember everything has to go back where it came from, no exceptions in this case.
Posted on Sep 22, 2009
Use a steering wheel puller to remove the snap ring that holds the big spring. Remove the screws that hold the signal light mechanism, and the signal light handle has to be removed. Lift the signal thing up to expose a "torx" headed screw. Remove that screw and the tumbler should pull out fairly easily. That torx screw should have an unthreaded part at the bottom of it. Make sure that comes with it. Sometimes they break off.
Posted on Sep 23, 2009
It's much too complicated to rewire the ignition... Maybe the fuses you used are not good quality. Only a service station can help you, I'm afraid...
Posted on Nov 30, 2009
did you flood if so change iol and filter remove plugs put some oil in each cylinder then turn over about 12 times put new plugs in and should fire
Posted on Jan 13, 2010
Tips for a great answer:
Mar 11, 2013 | 2002 Pontiac Firebird
Jun 17, 2010 | 1989 Pontiac Firebird
Jan 13, 2010 | 2000 Pontiac Firebird
Nov 05, 2009 | 2000 Pontiac Firebird
Sep 23, 2009 | 1979 Pontiac Firebird
Aug 04, 2009 | 1997 Pontiac Firebird
Sep 24, 2008 | 2002 Pontiac Firebird
153 people viewed this question
Usually answered in minutes!