Question about 2005 BMW X5

Open Question

How do you change a rear dome light in a BMW X5 2005? Thanks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change rear dome light on 2004 edpedition


if you haven't figured it out yet ,you pull off the rear headliner center plastic piece,it just pulls down ,then remove the 2 puch pins on rear of headliner, then pull out light fixture and replace bulb

Oct 19, 2014 | 2004 Ford Expedition

1 Answer

Why the dome light on the rear passenger side does not turn on when the doors are open. It does work when it pressed on though.


FIRST THING YOU DID NOT MENTION , DID YOU REPLACE THE LIGHT BULB ?
DID YOU CHECK FOR POWER TO THE UNIT,
GOOD TIME TO DO THAT IS WHEN YOU CHANGE THE LIGHT BULB, THEN CHECK FOR GROUND ON THE OTHER SIDE OF THE BULB, FIX MISING POWER OR GROUND, OR REPLACE BULB.

May 23, 2014 | BMW X3 Series Cars & Trucks

1 Answer

Bmw 2005 645 brake light is on


Rear brake Change light was on at 600 miles to service .got brakes changed and tried to reset dash on rear brake but went to. -15000 then brake light came on instead how do I get the light off?

Aug 15, 2011 | 2004 BMW 6 Series

2 Answers

The rear cargo light won't turn off. This happened after I replaced a rear turn signal tail light bulb and a fuse for the horn. (These went out at the same time.) When the blinker light and horn were...


Hello! The instigator of this problem appears to be the the rear cargo lamp; Official name is rear dome light. You'll need a multimeter set on the X10 ohm scale to shoot this trouble. Leave the rear dome light bulb out. There are two switches involved; #1 the rear dome light on/off. #2 the right hand front door switch.

Pull the horn fuse out, remove the rear dome light cover, drop the rear dome light down to access the wiring and close all doors on the vehicle. Connect one lead of the ohm meter to the white wire and the other to body ground. If you read any resistance one or both of the two switches (dome light switch or right hand front door switch) is remaining closed when all doors are closed. Next disconnect the black lead from the dome light switch and see if reading changes to zero. If it does this is indicating that the dome light switch is defective. If it does not, disconnect the right hand door switch and take another reading at the same location. If you still measure any resistance, the black wire of the rear dome light is shorted to ground, if not then the right hand door switch is the culprit.

The reason the right hand door switch and not the left hand door switch is involved is the fact that opening the left front door would turn on the front dome light as well as the rear light. If both dome lights are staying on with all doors closed I would then involve both door switches in this test procedure. If your vehicle is a four door model then disconnect one door switch at a time while performing this test procedure.

The horn fuse also supplies power to the rear dome light, and I suspect the two events are related.


Guru..............saailer

Dec 13, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

How do I remove the cover on a 2002 325i BMW tail light wiring? thanks


Do you need to change a bulb or are you changing to custom lamps. If it is bulb replacement open trunk/boot (depending where you live ) the access for the tail lamps is at the rear corners of the trunk, If you are changing lamp lenses or assembly remove the screws( same location ) at lamp corners

Jul 09, 2009 | 2001 BMW 325

1 Answer

1998 BMW Dome Lights do not come on when the doors are open


have you tried flipping the switch to door mood from off? if so then look at the cab and/or dome light fuse.

Jun 26, 2009 | 1997 BMW 328

3 Answers

BRAKE WARNING LIGHT


I dunno if this will work on your BMW, but on my BMW Z3 and M3, it was....

Turn the ignition key to position 2, but do NOT start the car. Wait for about 45 seconds and the brake warning message will be reset.

If it doesn't reset, then the brake sensor was damage. You will need to replace the brake sensor. It sounds like you replace the brake right after you saw the warning, so the brake sensor should be okay.

Dec 19, 2008 | 2003 BMW 325

Not finding what you are looking for?

Open Questions:

See all 2005 BMW X5 Questions

2005 BMW X5 Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...