Question about Chevrolet Cavalier

1 Answer

MY 2000 CAVALIER WAS SHOWING CODES FOR O'2 SENSORS, REPLACED BOTH FRONT AND REAR. THE ENGINE LIGHT CAME BACK ON, AND IS STAYING ON, I HAVE DRIVEN ABOUT 35 MILES, WILL THIS RESET ON ITS OWN, I NEED TO HAVE MY CAR INSPECTED, BUT THEY WONT DO IT WITH THE ENGINE LIGHT ON. SO WILL THEY RESET ON THERE OWN. THANKS MARK

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

It is suppose to reset on its own if the problem is fixed. Every vehicle has a different driving cycle for reseting each code. Give it some time. If the engine light does not go away, you will need to get the engine codes erased by a OBD2 Scanner. U can get that done almost at any automotive parts store, and its free.

Posted on Apr 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

02 Sensors, Bank 2 downstream


They should be replaced in pairs but that employee is incorrect. You can replace just the sensor showing bad.

Aug 15, 2016 | 2010 GMC Acadia

2 Answers

I have a 2005 cavalier: the abs light come on cleaned both front sensors, replaced the left front sensor, light still come on. My obdII scan reader doesn't indicate an error. I borrowed a scanner from a...


Have you checked your brake system for leaks? You may have air in the system that can cause the ABS light to come on. I had a similar problem with my last truck. ABS light came on and found a hole rusted through one of my rear brake lines.

Sep 29, 2013 | 2005 Chevrolet Cavalier

1 Answer

S10 2.2 liter auto. 163000 mile


the code P0137 is low voltage o2 sensor bank 1 sensor 2.. mean o2 sensor rear of catalyst converter has low voltage it should stay around .500mv mean converter cat.do is job.with a voltmeter test backprobe signal when engine running. by default key on engine stop around .500mv.

Aug 29, 2013 | 2000 Chevrolet S-10

1 Answer

My engine and abs lights are on. I replaced the rear ABS sensor, then replaced both front speed sensors!!! Now have codes C-1145 and C-1175 and P-1000!!


C1145 is a Right Front wheel speed sensor fault
C1175 is a Left rear wheel speed sensor fault.
P1000 System OBD check not complete since last memorie clear which mostlikely means that the car has not completed the drive cycle to set all monitors for the engine emissions. ( it may just need to be driven a more.
As for the wheel speed sensors if you have replaced them the ABS codes need to be cleared. the engine code reader and clearing tool will not do it. A scanner with ABS capabilities is needed. On some cars if you disconnect the battery and wait 3 mins then re connect the battery, that will clear all codes. then the car needs to be driven to set all monitors for engine emissions.
If you have already cleared the codes. and you have repete same codes for the ABS, you would need to look the wireing over for possible wire rubs that are causing the faults. or the ABS computer itself is at fault.

Apr 01, 2011 | 2002 Jaguar X-Type

3 Answers

2001 toyota avalon engine and vsc light stays on


You have to use a scanner and pull the code out that is causing the check engine light to come on. whatever code/codes you find are probably related to vsc light.
Good luck and keep me posted

Mar 09, 2010 | 2002 Toyota Highlander

2 Answers

Trouble code meanings for 2000 toyota avalon


the bank 1 is in the front of your car close to the radiator, the other one is the bank 2. I think you have to replace the bank 1 and bank 2 sensor and the po115 is the coolant temperature sensor, after you replace all these sensors and have the machanic reset or turn off the CHECK ENGINE light. check with the emmission inspector before you begin to replace all these parts. good luck

Jul 29, 2009 | 2000 Toyota Avalon

1 Answer

I have a 2000 323i. We have error code P1520. Which is Camshaft postion sensor bank 1 (exhaust). I replaced it and cleared the code. However, I drove it and the check engine light stayed off, until I...


i would not try the crank sensor just yet first off they **** to replace properly and you wont want to do that just yet, make sure it is the same code that has come back on as far as the banks are concerned on that enging the m52 the front 3 cly are bank 1 and the back 3 are bank 2, so unless it is talking about O2 sensors that is irrelivant, are you sure you replaced the correct sensor? it is the on in front on the engine with NO wire tail on it make sure it is plugged in correctly, this car is VERY good at knowing the difference between a cam sensor and a crank sensor the other guy does not know what he is talking about

Mar 30, 2009 | 2000 BMW 3 Series

1 Answer

1997 chevy cavalier 2.4l intermitant starting


replace the crankshaft postion sensor.

Feb 25, 2009 | 1997 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...