- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi, the freon refill point you are looking for is on the accumulator. but you can't see it cause it's buried by the heater hoses, battery cables, and firewall mounted fuseblock. remove the fuse block cover, and get a bright flashlight, look just below the fuse block and you will see the cylindrical accumulator(aluminum canister looking) and the low side pressure port with the plastic cap on it.
on my 2000 expedition it is located on top of the compressor. The compressor is barrel shapped and silver and has a belt attached to it. There are 2 ports on the air compressor, one low and one high. When charging your air conditioner the gauge will only attach to the low pressure.
Hi .. I just ran into the same problem .. I have a 2000 Expedition with the 5.4L engine .. the low side port is located on the passenger side of engine compartment just below the black metal bracket that contains electrical connections right in front of the firewall... you have to reach under this and locate the low side (larger line) and feel for the connection .. it is right in front of the accumulator .. There are two heater hose that hide the port .. you have reach under these to unscrew the port cap which is black .. you'll have to do this by feel .. I have found that you can by R134A charge with dye and leak sealant helps with small leaks .. if the system takes more than two cans be usre to add refrig. oil .. hope this helps
your system is a 134a it is not freon based. the lowside is the bigger port and usually has a large black or blue cap on it it should be located near the a/c compressor on the driver side where the line goes to the condensor. your high side should be on the passenger side near the dryer it will be the smaller port and have either a black or red cap. the ,low side pressure should be 35 psi and the high side should be 150 psi. please rate this.....thanks