Question about Ford F-150

1 Answer

Window on drvers side wont go up/have door panel off but window seems stuck

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 158 Answers

Sweetpeg123, You can try to jump the motor directly as long as the door panel is already off. You will need a car battery or very long wires that you can attach to your battery in the car. Unplug the window motor. Attach the wires to the battery terminals, trying not to let them touch when you do this. Touch one wire to one terminal of the motor and tap the other terminal with the other wire. The motor may go down a little further. If this happens then just reverse the wires and the motor should go up. If nothing happens when you do this then you have a bad motor and it will need to be replaced. If this works then you have a possible problem in the switch or the wire bundle going from the door to the body of the vehicle. If the other windows work then the fuse is fine and if not then check the fuse and replace with same amperage rating. Good luck with this.

Posted on Apr 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My driver side window on my 2010 Ford Fusion is not working but the other three windows role up just fine. What could be causing this?


turn key on put window switch in down position and hit door panel hard enough to jar any stuck brush in window motor !ps donot hit hard enough to damage door panel capish!

Dec 19, 2013 | 2010 Ford Fusion 2.5

1 Answer

How do I disable the window lock? Seems to be stuck...


should have a connector under door panel that the button connects too. most likely it is a computer lock so removing the connector wont solve your locked windows problem.

Jul 14, 2013 | 1995 Ford Taurus

1 Answer

Window wont raise


If its automatic, and all other windows raise with the button panel on the drivers door, then your problem is the motor within the door that raises or lowers the window. Easy quick fix.

If manual, the window probably got stuck and is jammed up within the door and needs to be bumped or put back on the track.

Jun 07, 2012 | 2006 Dodge Stratus

1 Answer

2003 convertible top wont go down


Yes there is its for power interuption. This include battery disconnect or if some disconnect and chang battery you need to do this.(you may also have to do power window pinch protection procedure) 1.Turn ignition switch on.2. Cycle all windows (lower and lift) using the all window switch .the one at the drivers panel. (or the one with your key control using drver door lock) should now work.

Feb 24, 2012 | 2003 Volkswagen New Beetle Convertible

1 Answer

The passenger side window went down and wont go back up


START THE VEHICLE, FOR MORE VOLTAGE, HOLD THE WINDOW SWITCH IN UP POSITION, SHUT THE DOOR WITH A LITTLE FORCE, NOT ENOUGH TO BREAK THE WINDOW. SOMETIMES WINDOW MOTORS GET STUCK. IF THE OTHER DOOR PANELS HAVE THE SAME WINDOW SWITCH YOU CAN SWAP THE SWITCHES TO SEE IF THE SWITCH IS THE PROBLEM THE WINDOW MAY GO UP . IF NOT THE DOOR PANEL WILL NEED TO BE REMOVED FOR MORE TESTING .

Jan 10, 2011 | 1994 Pontiac Trans Sport

1 Answer

Power window on drver side does not go up and down, but you can still hear the motor working in it. It is a 2004 Kia Sedona EX


Motor works but window doesn't move. Remove the interior door panel from the door and you should see the track the window travels in. The motor is normally at the base of the door. There should be a plastic track that pushes the window up and down that the motor actually moves to operate. On some models there is an actual metal gear and scissor type function. In these types of window systems it is possible for the gears to lose contact and when that happens the window stops operating.

Jul 22, 2010 | 2004 Kia Sedona

1 Answer

How do fix drver side rear sliding door window


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll see the innards of the door

Sep 21, 2009 | 2000 Mazda MPV

1 Answer

Drivers door wont open iside or out all seems fine but nothing works


It sounds like your linkage has disconnected from the latch. I guess your door is stuck shut. It may be possible, but really hard, but you could try to slide something into the window and try to hit the latch release. It'll be tricky though... If you do manage to pop the door open that way, you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you have to pull back the seal covering the door in order to access the linkage assembly from inside the door

Aug 17, 2009 | 2006 Saturn ION

1 Answer

Driver side window inching up to close and completely stuck now


just remove the door panel its pretty simple once you are in door panel you will see the motor.the door panel is held on by either screws or plastic push ins..there little plastiv pins that expand after they are in hole

Jun 17, 2009 | 2000 Toyota Sienna

1 Answer

Installation instructions to replace drver mirror on 2006 Sebring


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 28, 2009 | 2006 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...