Question about 2006 Chevrolet Silverado

1 Answer

I have a 2006 chevy silverado 1500 crew cab LT. The horn doesn't sound when I press the center pad on steering wheel. The fuses are ok and the horn does sound when I lock the vehicle or press the panic button on remote.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 443 Answers

It could be the contacts in the pad but I would be more inclined to think you have a faulty clockspring under the air bag in the steering wheel.

Posted on Apr 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Horn doesnt work all fuses and relays are good


If you know the fuse and relay have power, you should be able to jumper the relay and make the horn blow. The horn pad on the steering wheel usually grounds the relay. If you can jumper the relay and make the horn blow, the problem may be the horn pad or the clockspring in the steering column.

Sep 25, 2012 | 2003 Chevrolet Silverado 1500

1 Answer

Horn does not operate. I have checked the fuse and it is OK. Originally, the horn would not blow sometimes but now will not blow at all. Someone mentioned the horn ring inside the steering wheel may be...


Yes that sounds typical of slip ring and contact in steering wheel. If you have an air bag CONSULT MANUAL for removing steering wheel. AIR BAGS CAN KILL

Aug 11, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

Horn not working when you press on the streeing wheel but will work on key pad for a chevy pickup 2005 year 1500


Check the horn button on the steering wheel if it has continuity or just short out the wires on the switch connections. If there is only one wire on the horn switch, short it to earth to see if the horn works that way. That will indicate if the horn switch is faulty.

May 16, 2011 | 1999 Chevrolet Silverado 1500

2 Answers

Cannot get horn to make any noise? Fuses are OK. Truck sat over the winter months.Went to use horn and nothing. Does steering wheel pad come off. What should I do? 2005 Nissan Frontier 4x4 truck ...


Could possibly be a corroded wire, loose wire, bad ground. Not necessarily the wires going to it, but the accessory wire it is attached to. My horn worked when my vehicle was sold to me, then one day it stopped working. Never did anything about it, then 4 years later my power window stopped working. I spent 8 hours tracing out the wire and I found a corroded ground wire where it goes out to the door switch. I tested the power window and it worked and pressed the horn button..it worked too. Give it a try. Or you might just have a bad horn, try to tap it. It might work.

Jul 23, 2010 | 2005 Nissan Frontier

1 Answer

Horn on chevy silverado doesnt work. This was a state troopers vehicle and bought with a button get beside fuse box for a horn. would like to wire back to factory standard anyone know how to do this.


the horn wire is under the steering column with the turn signal switch molley plug and its a single black/ blk with white stripe wire just hook that to the other wire you found

Jan 21, 2010 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

How do i remove the ignition swicth from a 2004 chevy siverado 1500


The procedure to remove the ignition switch is
  1. Start by disconnecting you negative battery cable.
  2. Wait at least 1 minute to disable your airbag system.
  3. Remove the airbag from the steering wheel, it's retained by a couple bolts on the back of the steering wheel.
  4. Disconnect the wires to it, and set it aside.
  5. Remove the clip that is above the lock nut for the steering wheel, then remove the lock nut.
  6. You need a steering wheel puller to pull the steering wheel off. After you remove the steering wheel, you should have access to the turn signal switch.

Sep 18, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

Bucket seats with driver 1 and 2 memory and also seat warmer oh and the seat warmer does not work ever since.


Hi I'm not to clued up on 2004 silverado 1500 LT crew cab, obviously you'll check the fuse box & even replace the fuse wouldn't hurt giving it a try. Also try checking the electric motor for the seat. No cables lose or broken? Nothing jamming the seat? Is there any sound at all coming from the area where all the electrics are under the seat? Can you hear a motor straining?Just a few thoughts. Good luck

Jun 01, 2009 | 2004 Chevrolet Silverado 2500HD

Not finding what you are looking for?
2006 Chevrolet Silverado Logo

839 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...