Question about 1999 Ford Explorer

1 Answer

I have a 99 ford explorer and the power windows have stopped working fuse and relay are good. I can't locate the power window module, any suggestions would be helpful.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same thing happened to my drivers side. I have a 1999 Ford Explorer XLT. Mechanic found a broken wire in the wiring boot that runs from the door to the body. Spliced wire back together. Fixed the problem.
Alvin

Posted on Apr 11, 2011

  • egyptbruce03 Jul 14, 2011

    what wire was broken ,how do you check this,bruce

  • alvin_pember Jul 14, 2011

    nnnjk45. I checked with my bother about your problem. He is a senior master tech with Ford. He says, first, look in the wiring boot that covers the wires that run from the drivers door to the body and look for a broken wire. You can pull the boot back and actually push it inside the door to get it out of your way if you find broken wire. If no broken wires, go to the switch in the door that locks all the windows. All the window switches operate from that main switch. If you have a volt meter, check out the switch. If you don't have a meter or do not know how to use one, it might be time to take it to a shop or buy the switch from a Ford dealershp and hope for the best. Hope this gets you on the right path. Alvin

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 ford explorer windows stopped working


Are ALL your windows disabled? Nothing works?
Okay,I don't have an Explorer manual,but check for a large fuse out in the engine compartment that might say it's for door locks.
The reference for the fuse location is usuall in the cover of the fusebox.
Relays (little squarish boxes in the same fusebox) can also go bad,or shake loose.
I HOPE the problem is not the control module.don-ohio (:^)

Jan 06, 2013 | 1998 Ford Explorer

1 Answer

Cant find fuse for power windows?


According with the Explorer Owner Guide, I suggest...
1. Check for power on the Light Blue/Black (LB/BK) wire at the master window switch.
2. Check for a good ground to the master window switch on the Black (BK) wire. This wire provides the ground circuit for all of the window motors.

If both of these are good you probably have a bad master switch(drivers master switch).

The Light Blue/Black (LB/BK) wire gets its power supply from the accessory delay relay in the Central Junction Box (CJB) located under the instrument panel. The Generic Electronic Module (GEM) controls activation of the accessory delay relay. Fuse 2.17 is a 15 amp fuse in the CJB which supplies power to the relay. Fuse F1.6 is a 60 amp fuse in Battery Junction Box (BJB) which also supplies power to the accessory delay relay. G400(ground) is located at the driver side rear of the vehicle near the tail light assembly. This connection provides a ground for the master window switch (click image for zoom).

zjlimited_780.gif


For additional details, i suggest try to look and obtain this 2002 Explorer Owner Guide 6th Printing (English).

Hope helps.

Oct 12, 2011 | 2002 Ford Explorer

1 Answer

2000 ford explorer, fuse box don't show me what fuses are for


There are two fuse boxes. A baqttery junction box under the hood on the drivers side and one inside on drivers side. Good luck.


Fuse/Relay

Location

Fuse Amp

Rating

Power Distribution Box

Description

1 60A** I/P Fuse Panel

2 40A** Blower Motor Relay

3 50A** 4 Wheel Anti-Lock Brake System

(4WABS) Module

4 30A** Power Windows, Power Moon

Roof, Power Seat

5 50A** Ignition Switch, Starter Relay

6 20A** Transfer Case Relay

7 - Not Used

8 20A** Air Suspension

9 40A** Air Suspension

10 30A** PCM Power Relay

1 10A* A/C Relay

2 30A* Heated Seats

3 30A* Heated Backlight

4 15A* Fog Lamps and Daytime Running

Lamps

5 4 3 2 1

10 9 8 7 6

12 11 10 9

8 7 6 5

4 3 2 1

15 14 13

2 1 1

9

6

10

8

7

5

4

1

3 2

175

MEGAFUSE

Roadside emergencies

197

Fuse/Relay

Location

Fuse Amp

Rating

Power Distribution Box

Description

5 - Not Used

6 10A* Powertrain Control Module

7 30A* 4 Wheel Anti-Lock System

(4WABS) Module

8 15A* Rear Wiper Motor

9 20A* Fuel Pump Relay and RAP

Module

10 15A* Horn Relay

11 15A* Parklamps Relay and Mainlight

Switch

12 30A* Mainlight Switch and

Multifunction Switch

13 15A* Heated Oxygen Sensor, EGR

Vacuum Regulator, EVR Solenoid,

Camshaft Position (CMP) Sensor,

Canister Vent Solenoid

14 30A* Generator/Voltage Regulator

15 - Not Used

1 - Wiper Park Relay

2 - A/C Relay

3 - Wiper High/Low Relay

4 - PCM Power Relay

5 - Fuel Pump Relay

6 - Starter Relay

7 - Horn Relay

8 - Rear Wipe Down Relay

9 - Blower Motor Relay

10 - Rear Wipe Up Relay

1 - Not Used

1 - DRL Diode
2 - Electronic Engine Controls Diode

Apr 06, 2011 | 2000 Ford Explorer

3 Answers

All 4 of my power windows stopped working, and i can't find anything about a power window fuse in my manual


Power window usually don't have a fuse but an automatically resetting breaker. If all four windows stopped working at the same time check the body control module that is what manages the power windows. Good luck.

Mar 11, 2011 | 2002 Ford Explorer

1 Answer

Need to replace fuse for the power windows... do not know which fuse port is for the power windows and I have no manual to assist me... does anyone know which fuse port holds the fuse to the power windows...


the power windows are controlled through the Body Control Module. this module controls the windows through a circuit breaker under the hood in the relay and fuse box located near the master cylinder, it is
Position #62 30A CB Power windows circuit breaker, I really doubt this is the problem, but check it, if u have a short circuit the circuit breaker will be hot to the touch.

Mar 18, 2010 | 2003 Ford Explorer

2 Answers

I need a fuse box diagram for a 2003 Ford Explorer Sport


I believe that this is what you are looking for.....
Fuse and relay locations--2nd generation power distribution box Layout- I think this is a good sticky candidate--

attachment.php?attachmentid=29397&d=1133918512

Fuses are listed here

* = maxi fuse

1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay

6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay

mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator


Interior fuse panel (mini fuses)

1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**

15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

Oct 10, 2009 | 2003 Ford Explorer Sport

1 Answer

Which is the power window fuse on a 1997 ford explorer


On your 1997 Ford Explorer, in the power distribution box in the
engine compartment, in location # 4 there is a 30 amp maxi-fuse for
the power windows, power moonroof, and power seat.
DISCONNECT YOUR NEGATIVE BATTERY CABLE - PD BOX IS 'LIVE"
also in the fuse panel on the end of the dash, visible with driver's
door open there is a 7.5 amp fuse in location # 12 for the power
window relay, washer pump relay.

Oct 10, 2009 | 1997 Ford Explorer AWD

5 Answers

I need a fuse box diagram of a 98 ford explorer. My windows do not open and several of my fuses blew up I just don't know which one pertains to the windows


1998 Ford Truck Explorer 4WD 4.0L EFI 6cyl

Check this... (click on the pic)

4846843.jpg
Fuse panel and power distribution box identification for 1995-99 Explorer/Mountaineer models-Part 1

406e9dd.jpg
Fuse panel and power distribution box identification for 1995-99 Explorer/Mountaineer models-Part 2

06794eb.jpg
Fuse panel and power distribution box identification for 1995-99 Explorer/Mountaineer models-Part 3

Fuse Panel

bc39033.jpg
Located inside the passenger compartment, under the drivers-side of the instrument panel.

I really hope help you with this (rated this help) Good luck.

Sep 25, 2009 | 1998 Ford Explorer

2 Answers

Location of fuses and relays for the rear window defroster


two locations, one under dash and one under hood. without your manual, thats about all I can help you with

Dec 18, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
1999 Ford Explorer Logo

1,044 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...