Question about Dodge Ram 1500

1 Answer

Need to know torque for harmonic balancer bolt for 1998 Dodge Ram 1500 5.9 engine?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 4,977 Answers

The torque should be 150-180 ft lbs.anywhere in this range is good.

Posted on Apr 10, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT IS THE HARMONIC BALANCER TORQUE SPECS FOR A 2002 2.7L DODGE INTREPID?


This is for a 5.7 Ram
the torque should be 150-180 ft lbs. anywhere in this range is good.
http://www.fixya.com/cars/t8915727-need_know_torque

Register at this website to get all the torque specs.

http://www.autozone.com/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f8037c5e2

Aha, I took me 30 minutes, but here you go. The secret was the change of search query wording to;
2002 2.7 DODGE INTREPID TORQUE SPECS crankshaft damper

(198) Install damper center bolt. Tighten center bolt
while holding the damper with Special Tool 8191 to
170 N•m (125 ft. lbs.) (Fig. 76).

http://www.dodgeintrepid.net/18-general-discussion-second-generation/61664-so-your-2-7-ready-some-100k-repairs.html


WHAT IS THE HARMONIC BALANCER TORQUE SPECS FOR 2002 2 7L DODGE INTREPID...

Jan 11, 2017 | 2002 Dodge Intrepid

1 Answer

How much torque for each head bolt in a 2004 Dodge ram 1500 3.7 liter


Install the cylinder heads. Use new gaskets and tighten the bolts, in sequence, as follows:
  1. Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm)
  2. Step 2: Bolts 1-10 verify torque without loosening
  3. Step 3: Bolts 9-12 to 10 ft. lbs. (14 Nm)
  4. Step 4: Bolts 1-8 plus 1 / 4 (90 degree) turn
  5. Step 5: Bolts 9-12 to 19 ft. lbs. (26 Nm)


26002143-2qxw3km0vcnqu3setvnduoab-2-1.gif

Dec 10, 2015 | Dodge Cars & Trucks

1 Answer

How do i remove harmonic balancer & replace


YOU NEED A HARMONIC BALANCER PULLER TOOL AND A 15M SIX POINT SOCKET TO REMOVE HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE NEGATIVE BATTERY CABLE. REMOVE THE STARTER SO YOU CAN PUT A LARGE SCREW DRIVER OR LARGE PUNCH TO STICK IN ONE OF THE FLY WHEEL HOLES TO KEEP ENGINE FROM TURNING WHEN YOU LOOSEN THE HARMONIC BALANCE BOLT. ALSO SCREW DRIVER AND PUNCH CAN KEEP ENGINE FROM TURNING WHEN REMOVER THE HARMONIC BALANCER. YOU WILL NEED A HELPER TO HOLD PUNCH OR SCREW DRIVER WHILE YOU LOOSEN THE BOLT. YOU CAN GO TO SEARS OR ANY AUTO PARTS STORE AND BUY HARMONIC BALANCER PULLER.TORQUE HARMONIC BALANCER BOLT TO 76 FT LBS.

Apr 23, 2011 | 2003 Pontiac Montana

1 Answer

I need a belt diagram for a 2005 Dodge Ram 1500 with the 4.7L?


Hello. Looking at your engine from the FRONT of your truck. Starting at the very bottom at the harmonic balancer...Your serpentine belt goes from the balancer (to the right) outside the next two pulleys. The third is inside the pulley, outside the fourth and fifth, then inside the last one to the outside of the balancer. I hope this helps, good luck, and.. Thank you for trusting FixYa to help get you going!

Apr 26, 2010 | 2005 Dodge Ram 1500

1 Answer

What is the torque and sequence for a 1998 dodge 1500 ram truck with a 5.2 motor


Well,don't know what you're torquing first off. Second go to autozone's website & you'll find what you need there.

Jun 27, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Oil pump


remove oil pan from engine..oil pump is bolted to rear main bearing cap of engine..pickup tube may be plugged if you're having an oil pressure issue

Mar 24, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Harmonic balancer


check the pulley if it wobbles alot replac it. or,
bolt may be comeing loose
put red locktight on the bolt adn torque it to 76 foot pounds
rank my solution &vote

Dec 13, 2008 | 1998 Chevrolet Malibu

1 Answer

1998 dodge ram 1500 pick up (not 4wd)


easier on lift if not ramps on ground chalk wheel use stands once all belts are off remove center bolt on bottom crank pulley install crank pulley remover you may have to remove outer part of split pulley thread three puller bolts into bal there should be holes for this snug all three tight install adapter into center where main bolt came out thread tool against adapter as you tighten in the bal pulls out once out replace timing case seal at bottom of cover lightly apply grease or lithium on inside of seal put new bal alighn on keyway install reinstall tool slowly with air ratchet or impact gun reinstall slowly the grease on seal will stop seal from dry start up once bal all the way in install center bolt outer pulley if taken off belts etc

Aug 24, 2008 | 1998 Dodge Ram 1500 4WD

2 Answers

Harmonic balancer for 1999 dodge ram 1500


well if i remember correctly that fan clutch is reverse threads so in other words to loosen it you'll have to turn your wrench clockwise. they do this cuz the rotation of the fan will tighten itself onto the water pump. anyway what i do is leave the serpentine belt on the the pulleys and that will kinda hold them steady whilst you put the "special" wrench on the clutch and pop it loose you'll prolly need a cheater bar to make things easier but not too much or you'll overcome the traction of the belt and it will just slip.

Jun 02, 2008 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...