Question about Jeep Cherokee

1 Answer

Help!! Broke a belt on our Jeep Cherokee 4wd 2000. Air cond clutch froze in place need to by pass, what belt do,or can I use

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Jeep Master
  • 975 Answers

If the ac compressor won't turn even with the engine off,it's not the compressor but the freewheel bearing inside the pulley,
even if the compressor is bad ,changing the bearing will allow the serp belt to turn the pulley.
I'd just change the bearing .

Posted on Apr 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aircon does not engage when turned on


the air cond requires the belt on or the pump cannot rotate as the air cond is belt driven on every auto that i know of. now if the belt is slipping it is a cause of one of two things. belt is stretched or not tensioned properly, or the air cond clutch is froze up. when you turn on with no belt the clutch is engaged and you will not be able to turn pump with ease. Install new belt and have air checked for proper freon fill

Sep 04, 2012 | 2001 Volkswagen Passat

1 Answer

2000 jeep cherokee limited dual heat one side only blows hot air


You will have to check the flap operating controls behind the centre consol as anything could be wrong from a vacumn pipe to a operating mechanism ,even the computer controlling the climatic control .

Dec 03, 2011 | 2000 Jeep Grand Cherokee

1 Answer

Just bought a 1999 4wd jeep grand cherokee with 215k miles on it, what is some things i should do/replace to this jeep?


Check all the fluids and make sure they are good. i.e. diffs. oil, transmission, coolant, transfer case fluid, air filter. Use high mileage oil. Check the belt for cracks, usually it will start squealing a bit when it needs to be replaced. Tightening it will not help.

Feb 24, 2011 | 1999 Jeep Grand Cherokee

1 Answer

99 jeep cherokee air conditioning no longer works. Can I leave it there and use a shorter serpentine belt and by pass the air pulley? It has a 4.0 litre engine


well if the ac just deosnt work anymore or is the pulley itself locked up. if the pulley is locked up then yes go ahead and get a bypass belt, but if the compressor itself deosnt turn on and the pulley still turns u dont need to do anything to be able to drive the vehicle other than to check the pressure in the ac system u probably have a leak that has tripped the low pressure sensor that protects the compressor by not allowing it to turn on

Jan 20, 2010 | 1999 Jeep Cherokee 4WD

1 Answer

I just put in a new belt for my 2000 jeep cherokee sport and i started the car and it squeaked really bad, how do i fix it?


if you put these belts on yourself then you didnt tighten them to the right tension, there is a tool that measures correct belt tension probably autozone or any fixit shop, its easy to use. the only reason belts should squeak is if there to loose or one of the pulley bearings has froze up

Oct 29, 2009 | 2000 Jeep Cherokee

1 Answer

2000 jeep grand cherokee air conditioning


sounds like the clutch field on or bearing on the front of the compressor went bad take a closer look at the pulley on the comp. and see if there is any debris or melted plastic coming out behind the pulley,if so the clutch,field and bearing should be replaced,hope this helps

Sep 13, 2009 | 2000 Jeep Grand Cherokee

1 Answer

2000 jeep cherokee 4wd hood latch system broken - how do I open


It can be a pain, even for a skill mechanic, BUT you have to get under and trip the leaver or sometime if the cable broke on the inside you can strip the cable shroud and use plyers to pull the cable

Jun 10, 2009 | 2000 Jeep Cherokee

1 Answer

Where can i recharge my grand cherokee air cond?


you can do it your self go to autozone ,get the one that has the pre gauge on it it costs about $24.00

Dec 20, 2008 | 1997 Jeep Grand Cherokee

2 Answers

2000 Jeep Gr. Cherokee 4WD 4.7L under dash fuse diagram


Do you have the owners manual, so spots are left open on purpose.

Oct 14, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...