Question about 1997 Chevrolet Lumina

2 Answers

Turn signal stopped working. Can not find the relay fuse

Posted by on

  • 2 more comments 
  • mertec Sep 03, 2008

    can not find the turn signal flasher to replace it on a 1997 chevy lumina

    bulbs work and fuses are good

  • papasjacob Sep 24, 2008

    My turn signals quit working and there is more force now needed to move gear selector, it seems to be a dust problem. how do i dis-assemble to clean and lubricate the steering colum with out diployeing air bag?

  • Chatrivia200 Jan 04, 2009

    1999 lumina turning signal stp working

  • dogsrus Jan 25, 2009

    Turn signals quit workin'. Bulbs r good. Suspect relay or MSF switch. Need diagram or answer

×

2 Answers

May be the flasher relay needs changing, under the driver side dash, little square box , at least it is in my 98 lumina, way up there hidden in the wires above the brake petal . its a pain to gut under there. but you can change it like a fuse .
good luck

Posted on Oct 11, 2008

My signals do not work on my 1999 chevy venture, neither does my hazzards. i checked the fuses and they are all good.

Posted on Aug 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car signal stop funtion


have you checked the turn signal relay! It is above your left leg under the fuse access. under dash. do your emergency flashers work, because the relay is a combination relay for e-flashers and turn signals. if the flasher unit is ok, you may have a bad bulb or a short to ground.

May 17, 2014 | 1997 Dodge Grand Caravan

1 Answer

Rear lights not working on 2002 suzuki grand vitara


In the underdash fuse/relay box, the 15A TAIL fuse feeds power to the coil of headlight relay 2. When the combination switch is set to TAIL, the relay closes and the outer tail lamps light. In the same underdash fuse/relay box, the 20A STOP fuse feeds power to the brake light switch. When the brake pedal is pressed, the inner brake lamps light. The underdash fuse/relay box also contains the 10A TURN BACK fuse which feeds power to the hazard switch and the turn signal relay. Relay output is fed to the combination switch and turn signal power is applied to the selected middle tail light. The fourth fuse in the underdash fuse/relay box is the 15A HAZARD fuse which feeds power to the hazard switch and turn signal relay. When the hazard switch is set, the turn lamps on both sides begin flashing.

Sep 18, 2012 | 2002 Suzuki Grand Vitara

1 Answer

1988 subaru gl can't locate turn signal relay


there is no turn signal flasher or relay, its a combination switch, but there is a fuse, in the fuse box under the dash, the fuse isn't mark well, but says;

BACK
TURN
(4WD-AT)

if you have a gl-10 this fuse also controls power windows,
i had this same issue where my turn signals and my power windows stopped working (but my hazards still worked) and changing this fuse fixed all my issues

Jan 16, 2011 | 1988 Subaru Justy

1 Answer

Turn signals stopped working. Fuses are all ok,


sounds like the flasher can might have stopped working, you will need to get it replaced, it regulates the indicaters to blink, when it goes the circuit is gone, time for replacing id say. check the relays in the main fuse box under the bonnet first, try swapping the relay with another one like the horn relay just to test that first.

Jun 21, 2010 | 1999 Cadillac DeVille

1 Answer

1988 VW Cabriolet- All turn signals have stopped working.


The relay is in the fusebox, above the fuses. Looking at the relays, it's in the first row, above the fuses, should be the one on the far right. Problem should be that relay.

May 06, 2010 | 1988 Volkswagen Cabriolet

1 Answer

Why would the turn signals stop working. All


replace your turn signal relay in the fuse panel

May 05, 2010 | 1983 Honda Prelude

3 Answers

Blower motor and turn signals stopped working


CHECK BLOWER MOTOR FUSE AND RELAY.IF ALL IS GOOD.CHECK TO SEE IF BLOWER IS GETTING POWER.IF NOT.SWITCH IS BAD.IF YES REPLACE BLOWER MOTOR.IF TURN SIGNALS STOP WORKING.CHECK FUSE FIRST.IF FUSE LOOK GOOD. CHECK BULBS TO SEE IF THEY ARE BLOWN.IF BULBS LOOK GOOD PROBLEM COULD BE WORN OR CORRODED BULB SOCKETS OR.BAD GROUND.OR THE TURN SIGNAL SWITCH IS BAD.

Aug 24, 2009 | Plymouth Voyager Cars & Trucks

Not finding what you are looking for?
1997 Chevrolet Lumina Logo

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...