Question about 2003 GMC Envoy

Open Question

NEED DIAGRAM FOR THE BACK PASSENGER DOOR IN ORDER TO WORK ON WINDOW PROBLEM

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Passenger window doesn't work, new regulator.


if u have ck all fuses & relays& tried the passenger switch & still nothing,,could have broken wire between door & door jam where the rubber boot is ,,u mite have to peel it back to see wires

May 08, 2010 | 1994 Toyota Camry

2 Answers

2005 Honda Accord, all three passenger power windows stopped working. The drivers window works and the window lock is not on. When I try the switch on each of the passenger windows i cvan hear a clicking...


you most likely have a power/ground/switch issue in the drivers door. the power for the other three doors must first travel through the switches in the driver door before it goes to the passengers. hence the reason why when somebody rolls down a passenger window and you push the up button on the driver door the window stops moving. the wires can break inside the rubber boot in the door jam. you can also have an internal problem with the driver door switch unit. you would need a wiring diagram to diagnose this concern.

Mar 23, 2010 | 2005 Honda Accord

1 Answer

Passenger side window stop working all of a sudden. You can hear it clicking, but it will not roll down.


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you should be able to see everything. Your regulator may be bad or the window's caught on somethign

Oct 08, 2009 | 2003 Chevrolet Tahoe

2 Answers

Passenger side window not working


could be a bad motor, regulator, or switch

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. you can then test out the switch and if it's not the switch, you'll need to pull back the weather seal to get to the regulator and motor

Sep 09, 2009 | 1998 Dodge Grand Caravan

1 Answer

The passenger side window does not work. Is this


vice grip? you're lucky you didn't shatter the window.

So only the passenger front window is out based on what you're describing. Or are you trying to say all the passenger windows are out? (you have three passenger windows)

I am going with just the front passenger being out and that neither the switch on the driver's door or the switch on the front passenger door work to control the window. It's rare that both switches would die at the same time, so that rules that out. Now you said you pushed the button and the window does not move, if you don't hear a sound at all, odds are the motor is toast, if you do hear a sound, then the regulator may be stripped or broken.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to remove the motor which will be secured down by a few bolts

Sep 08, 2009 | 1997 Ford Taurus

2 Answers

VW Polo 2001 - Electric Windows wont open from Drivers side..


I removed all 3 switches from driver and passenger door, which is really easy with a flat head screw driver. took them completely apart, very carefully, with a small screwdriver out of a christmas cracker. put them back together again and 2 switches started working, so I put 1 in the drivers side and 1 in the passengers side so now my drivers door window opens and I lean over to open the passenger door. cool, no money spent...yet ;o)

Mar 25, 2009 | 2001 Volkswagen Golf

1 Answer

Power Window Not Working


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} I had the same problem. There’s a wire harness and plug that go thru a flexible boot between the body and the front doors to control the switch clusters on the doors.
Over time opening the doors will affect these components.
  1. Check fuse # 8
  2. Make sure the plug (referenced above) is secured.
  3. Peel back the boot carefully, and check the wires.
(In my Jeep, I found the black wire broken and the light blue w/blue stripe wire cracked. I fixed them on the drivers side, and the mirrors and the locks now work. My windows are still not working, so I’m going to check the passenger side.)
Good luck!
dwoodbutcher

Mar 18, 2009 | 1998 Jeep Grand Cherokee

1 Answer

My power window came off track


There are 2 screws just above the door handle you need to remove. Remove the plastic trim around door handle. Then starting at bottom of door panel pull out to disengage the push pin clips and work your way up both sides of panel. Then lift up on door panel to disengage the weatherstip on top of panel.

Feb 10, 2009 | 1998 Ford Explorer

1 Answer

1994 Jeep Cherokee Power Window Problem


When you open the drivers door you can see a wiring harness between the door and the body of the car.
You more than likely have wires broken in there.

Jul 19, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
2003 GMC Envoy Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...