Question about Hyundai Tucson

2 Answers

My mechanic was replacing the PCV valve on my 2006 Hyundai Tucson. He said the valve cover must have been cracked and under slight pressure the PCV port came off in his hand. The cost of a new valve cover is around $500 including labor. I was wondering if there is a cheaper fix.

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 869 Answers

I am afraid these kinda fixes are costly.

Posted on Apr 21, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 514 Answers

Well if you can do it your self? yes!! and if your lucky and find the cover in a junk yard could be alot cheaper. look for it in autoparts ans on line like rockauto.com. Thanks

Posted on Apr 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission filter on 2006 Hyundai Tucson need to be changed do you have to change filter


It's a good idea. The filter keeps particles from the clutch plates from entering the valve body. The damaged valve body is expensive.

Apr 16, 2017 | 2006 Hyundai Tucson

1 Answer

Where is the pcv valve 2006 ford five hundred


It is under the throttle body area and it is hard to get to unless you are doing the plugs and have it out of the way. My Ford dealer quoted $166 to change the plugs P&L. I did them myself. Look up your PVC valve on rockauto.com to see what it looks like.
1. Remove the 4 transaxle roll restrictor brace bolts.
o To install, clean the bolts using a wire brush, apply new threadlocker to the threads and tighten to 55 Nm (41 lb-ft) .
2. Remove the bolt and the transaxle roll restrictor brace.
o To install, clean the bolts using a wire brush, apply new threadlocker to the threads and tighten to 48 Nm (35 lb-ft) .
3. Disconnect the positive crankcase ventilation (PCV) valve tube from the PCV valve.
4. If equipped, disconnect the PCV valve electrical connector.
5. CAUTION: A new PCV valve must be installed if removed from the cam cover. Damage will occur to the locking mechanism on the PCV valve. Rotate the PCV valve counterclockwise to remove from the valve cover.
6. To install, reverse the removal procedure

Jul 14, 2016 | 2006 Ford Five Hundred

1 Answer

What advise can you give for multiple 2006 GMC envoy Denali engine problems?


What is the fault code you receive when the engine light comes on?
If you do not know try to retreive the engine trouble codes and post them here.

Jul 19, 2014 | 2006 GMC Envoy Denali

1 Answer

Abs brake system


Best case scenario bad vacuum pressure to the brake booster. Worst case bad abs control module or valve body/motor the abs system works by add and removing hydraulic pressure through valves and electric motor. Try using block off plugs at the master cylinder( remove lines plug outlets at master cylinder) check if brake pedal position and pressure is good(if there is no change problem is master cylinder or brake booster/ vacuum) if plugging at master cylinder solved issue repeat procedure at abs valve body after reinstalling lines from master cylinder if your problem returns your issue is in the abs valve body if plugging at the abs solves problem reconnect at the valve body bleed each line one by one testing between each line until you find the problem

Apr 11, 2014 | Hyundai Cars & Trucks

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

1 Answer

2006 hyundai tuscon serpentine belt issues


There may be a diagram under the bonnet, if not do a google search & you will find a diagram

Jun 01, 2012 | 2006 Hyundai Tucson

1 Answer

Pcv location


It should be at the back side of the valve cover under the engine cover.

Jun 24, 2011 | 2007 Hyundai Tucson Limited

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...