Question about 1993 Chevrolet S-10 Blazer

1 Answer

1993 chevy s10 blazer blower only works on hi when you tap the relay I have changed the relay and resistor but problem still remains

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 2,620 Answers

Sounds like it might be the blower control switch gone out to lunch.Its about a $10.00-$15.00 part.

Posted on Apr 10, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 91 chevy s10 blazer and the heater/ac does not turn on at all, checked all fuses and changed blower motor....................NOTHING. My frustration level is mounting-help me please.


Trace the voltage. Is there voltage at the motor? If not trace it back through the resistor to the switch to the fuse. That will probably tell you what you need to know. Does it work on ANY blower speed setting? Replacing parts before testing is ALWAYS going to be frustrating.

Nov 24, 2013 | 1997 Chevrolet Blazer

1 Answer

Chevy s10 blower motor resistor


Did you check the blower relay ?

Jun 17, 2013 | Cars & Trucks

1 Answer

2004 Chevy Trail Blazer,blower fan not working and the brake and ABS lights are on in the dash, checked all fuses,nothing blown. Can not seem to narrow down which relay goes to this section. Any thoug


Hello Linda! Replacing the HDM relay for the low beams will not trigger any of these problems. If the blower isn't working, you probably need to get a new blower motor resistor (for manual controls) or blower motor module (looks the same) for automatic climate control. To access, need to remove the plastic kick panel near your feet on passenger side. After removed, look up you'll see the resistor, it's about 4" long with 2 small screws in it. You'll also need to drop the glovebox door to remove the connector from the resistor to the motor. Suggestion- buy a pig tail for the resistor also, these tend to melt. Very common problem. The ABS dash could be a bad wheel hub assembly or a hub starting to go bad.

Jan 24, 2018 | 2004 Chevrolet TrailBlazer

1 Answer

How do you replace a blower motor resistor on


It is located on the right rear of the engine compartment. held in by two screws.

Jun 29, 2011 | 1997 Chevrolet Blazer

1 Answer

Where is the location of the blower motor resistor on a 1997 Chevy S10 Blazer?


Under the dash panel in the heater box on the passenger's side next to the blower motor, it's held in by 2 screws.

Jan 13, 2011 | 1997 Chevrolet Blazer

1 Answer

My heater has no power going to it chevy blazer s-10 1988


CHECK POWER WITH A 12 V TEST LIGHT AND CHECK GROUND. USE TEST LIGHT IN REVERSE HOOK TEST LIGHT GROUND CLAMP TO POSITIVE TERMINAL AND TOUCH THE BLOWER MOTOR STEAL CASE . YOU CAN (TAP) ON THE MOTOR AND IT MAY SPARK IT BACK TO LIFE . ALWAYS CHECK ALL OF THE FUSES WITH THE IGNITION ON CAR NOT RUNNING AND IN PARK. LOOK FOR THE FUSE THAT ONLY ONE SIDE LIGHTS THE METER .. NO LUCK ? NEXT IS THE CONTROL SWITCH OR THE BLOWER RESISTOR , FAN HI SPEED MISSING IS THE HI BLOWER RELAY ITS UNDER THE HOOD NEXT TO THE BLOWER

Jan 09, 2010 | 1988 Chevrolet Blazer

1 Answer

Fuel Pressure Relay location


Hello, There is no fuel pressure relay. If you mean fuel pump relay, you can find this by opening hood, look towards driver's area, on the firewall just below the cowl vents you should see a relay with 5 wires going to it.
CYA, Gator241

Feb 09, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

Heater Control


Try the blower relay it mounted near the resistors on the fire wall

Jan 23, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
1993 Chevrolet S-10 Blazer Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...