Question about Mitsubishi Lancer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Some time back I found some data on a similar website suggesting that the Day Light Running circuit board, just under the steering column, developed cracks in some of the soldered joints. Your high beams should also be affected with loss of day light running lights.
Resoldering repaired the continuity of the circuits. Ours is now working quite reliably. Some of the defective areas developed slight brownish discoloration, that's how I was told to recognise the areas to be resoldered. Hope this will help you solve your problem.
Posted on Jun 10, 2008
It's a bulb replacement. If it's anything similar to my Audi, there is a cover on the back of the headlight housing that you pop off. Then you can reach in, pull the wire connector off the bulb, and unclip a metal retainer over the bulb, and pull the bulb out. Installation of the new one is the reverse. Just be SURE not to touch the glass part of the bulb. Skin oils can cause a halogen bulb to burn very hot and burn out very quickly. If you do touch the glass, wipe it gently but thoroughly on a cotton cloth to clean it off before you install it.
Posted on Oct 31, 2008
SOURCE: Low beam headlights don't work
I know this is not your problem, but my low beam stopped working, both bulbs failed, no burn marks or broken element. Just had to tell someone
Posted on Mar 24, 2009
it more then likey a lose wire or bear one. run the line down. i think that the high beams run on diff. fuses. you can try that!
Posted on Jul 13, 2009
had the same problem on my 92....check under the hood on the drivers side,towards the front,there is a "junction box" with all of the lighting wires connecting from the switches to the lights.My wires were all corroded inside,so I cleaned the ends and bought a new box from the local electronic supply store.The problem has not come back.
Posted on Jul 15, 2009
Tips for a great answer:
Dec 13, 2014 | Chevrolet Silverado Cars & Trucks
May 14, 2014 | 1999 Pontiac Grand Prix
Feb 23, 2013 | 2004 Honda Accord Sedan
Apr 17, 2011 | 1998 Lexus Gs 300
Jan 04, 2011 | 2005 Toyota Corolla
Jun 24, 2010 | 1995 Chrysler New Yorker
May 12, 2017 | 2003 Mitsubishi Galant
Sep 25, 2009 | 2000 Chevrolet Cavalier
Apr 01, 2009 | 2001 Subaru Outback
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: