Question about 2003 Chevrolet Impala

1 Answer

2003 impala was making squealing noise from serpentine pulley area, finally belt slipped off. Changed both Tensioner and belt, same problem as before, belt slipped off again, pulleys seem to turn alright, can one be freezing up. What do you think is the problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,940 Answers

Remove the belt, and check each pulley for resistance, or play. Each pulley should turn with ease, and have little to no play. Replace any pulleys that are found to be faulty. Check for pulley alignment. If the Crankshaft Pulley or any other pulley has loosened up, or not aligned properly, the belt will come right off. This is usually due to a frozen or faulty Idler Pulley or Tensioner Pulley. If all else checks out, ensure that the ribs are properly installed on each pulley, and no ribs are hanging off of any pulleys.

Posted on Apr 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Echo makes a squealing noise randomly when driving & airconditioner is turned off?


Your serpentine belts tension is loose or the belt is going hard. Check the tension on the tensioner pulley and condition of belt.
The belt is slipping on your accessory pulleys when a load is placed on them such as power steering, alternator and clutch fan.

Jun 15, 2015 | 2004 Toyota ECHO

2 Answers

Makes squealing noise


The squeal would be the alternator slipping on the belt. I would think either the newly installed belt is not the correct length, or the belt tensioner is no longer doing its job properly.

Jul 09, 2014 | 2006 Scion xB

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    Need diagram for serpentine belt for chevy imo l s 2003


    Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2003 Chevy Impala.

    http://www.2carpros.com/car_repair_information/year/2003/make/chevrolet/model/impala/2003_chevrolet_impala_drive_belt_routing_diagram.htm

    GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
    A. Find the Tensioner(s). (See Diagrams on Link)
    B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
    C. Remove the loosened belt off one of the other more easily accessed Pulleys.
    D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

    Standard Rules for Installing the Serpentine Belt with Tensioners:
    a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
    b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
    c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
    d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
    e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

    Mar 30, 2010 | 2003 Chevrolet Impala

    1 Answer

    Serpentine belt position


    Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2003 Chevy Impala.

    GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
    A. Find the Tensioner(s). (See Diagrams on Link)
    B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
    C. Remove the loosened belt off one of the other more easily accessed Pulleys.
    D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

    Standard Rules for Installing the Serpentine Belt with Tensioners:
    a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
    b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
    c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
    d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
    e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

    Mar 30, 2010 | 2003 Chevrolet Impala

    4 Answers

    Car squeals when starts and when rains.Clicks when i drive now


    You need to tighten/replace your alternator belt as it is either worn or loose.

    Sep 15, 2009 | 1997 Nissan Sentra

    2 Answers

    My Serpentine belt is squealing above idle


    first thing you need to do is get a new belt that belt dressing just destroyed that belt that stuff is no good then get a new belt tensioner clean all the pullys with some brake clean then install the belt tensioner and belt if its still sqealing there maybe a pully making the noise to check that when you have the belt off spin them by hand and listen to them and feel for any play in the bearings

    Jul 19, 2009 | 1999 Plymouth Voyager

    1 Answer

    I have a high picth squealing coming from my pulley area.


    It sounds like you have a Bad Belt Tensioner. Replace that and your Belt should stop Hollerin at ya!

    Jan 12, 2009 | 2003 Chevrolet Impala

    2 Answers

    Loud squealing noise


    The noise is most likely the serpentine belt. Check it's condition and that of the belt tensioner. It sounds like the belt is slipping, causing the squealing noise u describe. As the belt warms up, it's getting a better 'grip' and the noise stops. Turning on the heat also turns on the a/c in newer cars, this added drag on the belt (one more component to turn, the a/c compressor) would explain why it happens when u turn on the heat. Is the belt original? If yes, it's time to change it, and check the belt tensioner to make sure it's doing it's job of keeping the belt snug on all the pulleys. Let me know how u make out.

    Dec 13, 2008 | 2003 Nissan Pathfinder

    Not finding what you are looking for?
    2003 Chevrolet Impala Logo

    487 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    75051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7726 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...