Question about 2005 Chevrolet Impala

Open Question

Installed LED Halo Projector headlights in my 05 Impala but encountered an issue. The front left and right turn signals fo not work. All other lights work. When using the turn signal the indicator and rear turn signals blink really fast. The bulbs do work. Wiring- the power cable that runs fro, the hi/low beam is connected and linked into the cars headlight connector (power cable- yellow wire) the turn signals have a harness that connects to the stock harness coming from the car. Any clues, I tried to give as much detail as possible. PLEASE HELP! I don't want to have to pay someone to fix it if I can do the work myself. thanks. Jon

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 106 Answers

SOURCE: Turn Indicator won't work when headlights on!

  • the flasher relays are out there a circle looks like a big fuse but anyway check at auto part store replace blinkers, that may,help!

Posted on Mar 24, 2009

kidspeedy
  • 321 Answers

SOURCE: left rear turn signal light on my 1999 chev. s10 is not working

any increase in bink speed is direcly related to a bulb being burt out.

Posted on Jun 12, 2009

  • 288 Answers

SOURCE: i have possible electrical wiring problems, my

I WOULD CHECK THE ALTERNATOR, POSSIBLY OVERCHARGING. I WOULD ALSO REPLACE 2 OF THE SMALLER BULBS BEFORE STARTING THE CAR. IF THE BULBS COME ON, FIX THE CHARGING SYSTEM & REPLACE THE REST OF THE BULBS

Posted on Jan 02, 2011

  • 14036 Answers

SOURCE: I have a 1998 Chevrolet

THE HIGH BEAM LIGHTS WIRE COLOR LIGHT GREEN AND LOW BEAM WIRES TAN COLOR,YOU NEED LOOK IN A HAYNES REPAIR MANUAL IN THE ELECTRICAL SECTION AT HEAD LIGHT CIRCUITS.

Posted on Apr 07, 2011

archaeology
  • 662 Answers

SOURCE: 2008 Chevy Cobalt front right

No - headlight ok.
The reason that the Right turn signal blinks fast is that there is half the normal load (resistance)
on the right side, since the Right front turn signal isn't working.
Since you replaced the Right front turn signal bulb, your problem lies in the bulb socket or
the wiring to the socket.
(1) try cleaning out the socket - there's probably a contact problem in the socket. You
may need to squeeze the contacts together to provide good contact to the socket contact.
(2) if contacts inside the socket are ok, try back-probing the socket - to make sure that the
socket is getting 12V DC to light the bulb. Replacing a bulb socket is easy, and commonly done.
Any auto parts dtore should be able to sell you a new socket - its just a matter of cutting out the
old one, and then splicing in the new one. Most shops will use small wire nuts, buried under several
wraps of E-tape (electrical tape).
(3) if bulb AND socket ok, you have the worst problem known to man - a wiring fault. In this case,
you'll want to run a new wire from the flasher module (under the dashboard) to the turn signal.

Posted on Jul 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I replace front HID light bulb? and where can I purchase parts for replacing?




  1. INSTALLATION GUIDE:


  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights


  3. Parts Identification:


  4. Projector Headlight


  5. Halo & L.E.D.


  6. Bottom of the Headlight:


  7. Ballast Bracket, Halo Wires(red/black)


  8. Turn Signal Adaptor


  9. TOOLS REQUIRE


  10. 10mm - 8mm socket


  11. Philip Screwdriver


  12. Crimper/Pliers


  13. For more information about how to install your vehicle, come visit our youtube page on


  14. http://www.youtube.com/spyderauto


  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.


  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.


  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.


  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.


  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.


  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.


  21. STEP:


  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.


  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.


  24. Factory Xenon Headlight


  25. Spyder Projector Headlight using Factory Xenon Lights






replace-front-hid-light-bulb-purchase-afy5cnsznmokzumyhdcbeseq-5-0.jpg

May 21, 2014 | BMW 335i Cars & Trucks

2 Answers

I have problem with hid light


follow this link to u-tube video not the exact vehicle but the principle will be the same,or search for your exact vehicle
How to replace low beam xenon HID bulbs 2006 BMW 330i

May 08, 2014 | 2007 BMW 335i Coupe

2 Answers

How to change headlight bulb


On the back of the headlight where the wires enter, you should be able to twist and remove the lamp holder. Be careful with the new bulb if it is halogen, do not touch the bulb!!

Apr 13, 2013 | 2000 Hyundai Sonata

3 Answers

Replace headlight bulb


  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
  27. PLS VOTE ME
BMW e46 HID Headlight Replace
replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-0.jpg

replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 23, 2012 | 2000 GMC Denali

2 Answers

How do I get to the front headlight to change it


Re: Replace headlight bulb

  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
BMW e46 HID Headlight Replace
get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-0.jpg

get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 22, 2012 | Cars & Trucks

2 Answers

Lt. headlight low beam wont work after replacing the bulb.


I assume it didn't work before you changed the bulb either. You'll have to check for voltage at the bulb socket when the low beam headlights are turned on. If there is none you'll have to trace the wire back to where it splits from the right low beam headlight. If there is voltage there you have a problem with the new bulb.

Apr 10, 2011 | 1991 Lexus LS 400

1 Answer

I bought some halo driving lights for my '03 GMC Sierra 1500, they came with a wiring harness, switch and everything needed for installation except for installation instructions. Help PLEASE!


Tools recommended for this job: wire stripper, wire crimper, volt meter, 4x quick wire connectors, 4x male crimp connectors, 4x female crimp connectors
  1. First, tape the halo and/or LED wires to the back of the headlights to keep them from tangling.
  2. Keep the pairs in order by their color, e.g. black, black (ground) and Red, Red (positive). Note: positive and ground wires might not always be black and red.
  3. Remove some of the plastic shielding at the end of the wires to expose enough copper wire, next twist the copper together to strengthen it.
  4. Shove the twisted copper into a crimp connector; crimp the location where wire and the connector end overlaps, wrap with electrical tape to secure it.
  5. Two extra wires in black and red will be helpful to make the halo/LED wire longer to easier installation. Remove shielding: show copper: use the connectors: connect the positive and ground from the headlights.
  6. Next step, turn the headlights inside the car to the [on] position.
  7. Take the volt meter and connect the negative to the negative on the battery (please use extreme precaution when doing so).
  8. The headlight harness usually will have [3] wires, generally red, black, green (headlights, ground, turn signal). Use the volt meter to test which wire will have power running through it (since the headlight is in the [on] position) which will be the headlight wire.
  9. Use the quick connector to connect the extra wires (red) to the power wire on the harness and black to the ground. This will split the current coming from the harness. Crimp the connectors and use electrical tape to secure it.
  10. Now connect the projector headlight halo wires and the harness from the car.
  11. No wires should be left over unconnected.
  12. The installation is now complete.

Jan 14, 2011 | GMC Sierra 1500 Cars & Trucks

2 Answers

How do you change front headlight blub 2008 sonata


how do you change front headlight blub 2008 sonata

Nov 28, 2009 | 2008 Hyundai Sonata

2 Answers

How to install hid on a bmw 325xi 2006


INSTALLATION GUIDE:
BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
Parts Identification:
Projector Headlight
Halo & L.E.D.
Bottom of the Headlight:
Ballast Bracket, Halo Wires(red/black)
Turn Signal Adaptor
TOOLS REQUIRE
10mm - 8mm socket
Philip Screwdriver
Crimper/Pliers
For more information about how to install your vehicle, come visit our youtube page on
http://www.youtube.com/spyderauto
Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
STEP:
Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
Factory Xenon Headlight
Spyder Projector Headlight using Factory Xenon Lights
STEP:
pls vote an diam giving you link also for better help BMW e46 HID Headlight Replace
install-hid-bmw-325xi-2006-afy5cnsznmokzumyhdcbeseq-5-0.jpg

install-hid-bmw-325xi-2006-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Oct 15, 2009 | 2003 BMW 325

Not finding what you are looking for?
2005 Chevrolet Impala Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...