Question about 1992 Ford Ranger

1 Answer

1992 Ford Ranger check engine came on just quit running. I have changed the fuel pump and filter, 1 coil had the modulator checked.also checkedchaliechavi the fuses still cranks but no start

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

I would have the vehicle run on a scanner to get the cause of the check engine light. Ford used the fuel shut off switch. The owners manual should show you the location and how to reset it if it tripped.

Posted on Apr 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Ford ranger XLT 2.3 won't stat relaxed many parts what could problem?


engine module ????? EEC - engine control module ? Or the ignition control module ? Learning how to test electronic system an not replacing parts is the way to find the problem .
ScannerDanner gets his but kicked by an 88 150 EEC IV Ignition

Apr 23, 2017 | Ford Cars & Trucks

3 Answers

Does an ignition control module have anything to do with fuel pump functioning?


1987 rangers use a device called a TFI module to control ign. timing , this merely triggers a std. coil to fire the center port of distributor cap , this device only controls the coil to fire but does send a pulse for timing back to ecu this sets the base pulse for fuel injection , but its also affected by manifold Air flow and exhaust O2 amounts (closed loop) , but engine should run in base mode (open loop) fuel timing (but not well) , fuel pump relay is enabled to run via ECU output , Now your year ranger had a tech bulletin out on fuel pumps , seems they had a problem getting them to work after a fuel filter was replaced , something about a false backpressure , no if you have no/low fuel pressure then id look at fuel pump power 1st then fuel pump itself assuming you've already tried a new filter of course

Jun 14, 2015 | 1987 Ford Ranger

1 Answer

Engine problem starts and turn off


Someone would need to check base fuel pressure with a gauge before and after cranking the engine.
Could be the fuel pump, filter, or the pump relay.

May 07, 2013 | 1992 Ford Ranger

1 Answer

1994 Ford Ranger Starts runs for 3-4 minutes then dies, changed ignition mod, fuel pump, fuel filter, fuel pump relay,checked vac hoses, totally lost!!!!!


As with any no-start or stall problem you will need to figure out if it is a fuel or ignition issue.
The high idle usually means you have a vac leak or a problem with the throttle body or idle air control valve. The control valve is how the computer controls the idle speed.
You'll need to watch the fuel system and spark to see which is being affected when the engine dies.
You might want to hook a test light up to the coil to see if it is loosing voltage for example.

Jul 31, 2012 | Ford Cars & Trucks

1 Answer

1992 ford ranger will not crank- the starter will turn it over but never start. when i trung the key can hear the fuel pump turn on - added fuel still nothing . been a great truck since 92- what do i need...


Check for spark. No spark can be from the coil, igntion module, crank sensor. Have the codes check, this will at least point you in the right direction.

Feb 05, 2011 | 1992 Ford Ranger

1 Answer

1992 Ford Ranger XLT V6 wont start without ether


first go to an auto partstore and have the code checked. most do it for free. could be coil, fuel pump, fuel filter, air filter or even a bad gas cap. but the dianogstic test should pin point the problem.

Jul 01, 2009 | 1992 Ford Ranger

1 Answer

No fuel


You may have put the filter on backwards. If you did I might have ruined the fuel pump. Whether or not you did, test the wires that run to the pump. If they are getting power, you need to replace the pump. If not, start checking fuses and relays.

Dec 14, 2008 | 1992 Ford Ranger

2 Answers

92 ford ranger


replace fuel pump. replaced fuel filter.check relay switch,fuel cutoff switch... any ideas.

Jun 11, 2008 | 1992 Ford Ranger

Not finding what you are looking for?
1992 Ford Ranger Logo

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...