Question about 1995 Hyundai Elantra
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try taking a pin and cleaning the holes on the squirters and if that does not work check the washer pump it is located on the washer fluid tank
Posted on Apr 17, 2009
You can actually do it from the top if it is similar to a 2001 Elantra??? On your right center of the tranny, there should be two big bolts I believe a 17mm one on the bottom left the other top right of the other. The bottom left is the drain plug the top right is where you fill it. If you want to make things easier you can remove the air cleaner and the air cleaner housing then unscrew the sensor on top of the tranny you can poor it in from the top. You will need to then unscrew the fill hole (Top right bolt) Pour the lube in to the hole where you had taken out the sensor until it pours out of the fill hole. Sounds like more work but by doing this you will avoid making a mess trying to fit the squeeze bottle into the tiny hole. Hope this makes Sense????
Posted on May 17, 2009
Ensure timing marks aligned  &  . 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets. 2. Slacken tensioner pulley bolt  . Push tensioner pulley firmly against timing belt to tension belt. 3. Tighten tensioner pulley bolt  . Tightening torque: 43-55 Nm. 4. Except Matrix: Turn crankshaft one turn clockwise. 5. Matrix: Turn crankshaft two turns clockwise. 6. Ensure timing marks aligned  . 7. Apply a load of 2 kg to belt at . Belt should deflect 4-6 mm. If not: Adjust position of tensioner pulley. 8. Install components in reverse order of removal. 9. Tighten crankshaft pulley bolt  . Tightening torque: 170-180 Nm
7 is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head
6 is crank timing mark,pin mark on crank lines up with mark on block
NOTE this mark is just before top
Posted on Mar 21, 2010
Tips for a great answer:
Sep 13, 2010 | 1995 Hyundai Scoupe
Jun 17, 2010 | Hyundai Motor 2002 Sonata
Jan 16, 2010 | 1993 Hyundai Elantra
Nov 04, 2008 | 1993 Hyundai Elantra
Oct 26, 2008 | 2000 Hyundai Elantra
Aug 24, 2008 | 1993 Hyundai Elantra
Aug 26, 2014 | 1995 Hyundai Elantra
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: