Question about 2006 Pontiac G6

1 Answer

My brake lights work opposite. when im not on the brakes they are lit up when i touch the brakes mu lights go out

Posted by on

  • demillion Dec 07, 2008

    I am having the same problem...did you find a solution?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Probably a ground issue with some of the wiring for your taillights. make sure you dont have a pinched wire.

Posted on Jun 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My ABS light stays on, Can the ABS system cause my rear wheels to heat up? (To hot to touch) 2003 ford explorer.


Remove the ABS fuse to disable the ABS system . The brakes will work as NORMAL brakes and you will now see if the rear brakes heat up. They more than likely will as the ABS would not have any effect on the brakes in normal running situations.
Suggest take the vehicle to a GOOD brake shop and get them to fix the problem

Apr 22, 2015 | Ford Cars & Trucks

1 Answer

Parking brake light is on and brake feels stuck


It most likely has one or more frozen brake calipers (very common)I suggest replacing them in pairs, Make sure you flush the old brake fluid out.Check the E-Brake cables to make sure they move freely.The light coming on could be low fluid level.

Jan 10, 2012 | 2000 Oldsmobile Intrigue

1 Answer

Im looking for color of a brake wire


Hello heinz2127: My name is Roger and i will help you. The rear brake wires are green and yellow. They also are the turn signal wires. The brake lights work through the turn signal switch.The turn signal switch has logistics for determining which side is blinking so as to make the opposite side to show park brake light.Check the fuse box for a blown fuse. Look at the fuse box under the hood. Also try this. Turn on the four way flashers. Step on the brake pedal . The lights should stop flashing If not I would replace the turn signal switch.

May 31, 2010 | 1997 Ford F150 Regular Cab

1 Answer

When I turn on lights of 91 Camry, tail lights & backup lights are not lit. Rear side marker lights & license plate lights are lit. When I step on the brake, all the rear, stop, backup, plate and...


I have a 98 Camry and was having problems with tail lights and fuses. I kept blowing a fuse which was making my tail lights not work. I tried paying very close attention to when they would be working and all the sudden not be working. I know it sounded funny, but I told my mechanic that it seemed if I used my trunk, my fuse would blow. Come to find out, the wire was touching the hinges of my trunk. So when I popped my trunk and closed it, it blew my fuse every time.

Sep 14, 2009 | Toyota Camry Cars & Trucks

1 Answer

Tail light wiring problem on a 95 grand cherokee.


check the switch thats hooked on to the brake pedel under the dash

Apr 30, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Brake lights stay on 2001 chevy s 10


There is a brake light swich along the brake peddle that need's to be adjusted. Quick and easy fix.

Apr 06, 2009 | 2001 Chevrolet S-10

1 Answer

Brake lights/ Turning signals not working on a 2004 cavalier


change brake light switch . check brake switch wiring . for shorting then check tail light bulbs sockets. if you cant find it. you probably going have to buy a short finder.

Mar 25, 2009 | 2001 Chevrolet Cavalier

1 Answer

Brake light wiring reversed?


hi go back to bulb and make sure the bulb you have fitted is for indicator? this has only one element and has only one centre contact for power also check the side pins on the body of bulb they should be opposite one another and on same level as you look on side however here in uk some of these bulbs are the same as above but for the locating pins as described above the pins are on same level but not opposite each other so if you try fitting should not be able to fit easily bayonet suggest you check the other side rear light bulbs one at atime to ensure correct type are what you have fitted stop and tail light bulbs have two elements one for brake and one for tail light these locating pins are oposite each other but not on same level offset to ensure the elements are on correct circuit when fitted hope you understand ?

Nov 02, 2008 | 1995 Ford Contour

2 Answers

Signal and brake lights


Igot the same problem on left side.The problem was the convertor for the trailler plug.

Jul 16, 2008 | 2005 Chevrolet Colorado

Not finding what you are looking for?
2006 Pontiac G6 Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...