Question about 2000 Honda Passport
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Normally attached at opposite end of throttle linkage. Remove your air cleaner intake hose at throttle body, and observe throttle plate that opens & closes as you press accelerator, it will be at the end of that, on outside of housing.
Posted on Jan 10, 2009
SOURCE: 2000 Honda Passport wont start.
I ended up finding a repair shop here in Cleveland. The problem ended up being a short in the electrical system. My fuse kept blowing. That's why it wouldn't restart. If you decide to take your vehicle to a repair shop, have them check out the electrical system. My problem was found under the drivers side fender. Some of the wires were corroded. Good luck!
Posted on Feb 18, 2009
I had the similar problem after changing out the waterpump and timing belt, came to find out it was the battery cable connectors needed cleaning. simply use a wire brush and clean the inside of the connector before connecting it to the battery terminal post. When you have insufficient voltage going to your electrical components, it will tend to chatter(relays). This was the first symptoms i had with my passport, but once i cleaned the cable connector to the battery post, it started right up,problem fixed. I hope this helps. 2kpassport.
Posted on Dec 13, 2009
Tips for a great answer:
Dec 06, 2013 | 2000 Isuzu Rodeo
Aug 31, 2013 | 2000 Honda Passport
Nov 23, 2011 | 2000 Honda Passport
Sep 01, 2010 | 2000 Honda Passport
Feb 08, 2010 | 2000 Honda Passport
Oct 05, 2009 | 2000 Isuzu Rodeo
Jun 08, 2009 | 2000 Honda Passport
Jun 04, 2009 | 2000 Honda Passport
Feb 07, 2009 | 2000 Isuzu Rodeo
209 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: