Question about 1997 Buick Skylark

1 Answer

Whats the Torque Spc.'s On heads - 1997 Buick Skylark

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

On the 4 cylinder

step 1 bolts 1-8 40 ft lbs. bolts 9-10 30 ft lbs.

step 2 all bolts an additinoal 90 degrees


on the V6

step 1 44 ft lbs.

step 2 additinoal 95 degrees

Posted on May 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rockervalve head torque 3.4 liter


168 in. Lb. Which equals 14 ft./lb.also tighten additional 30 degrees after you reach torque.good luck

Nov 25, 2013 | 1997 Chevrolet Venture

1 Answer

Want to know the amount of torque pressure do i use when tightening the head bolts, and whats the sequence?


To install:

0996b43f80208f65.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Cylinder head bolt torque sequence-3.8L engine

  1. Install the new cylinder head gasket with the arrow pointing to the front of the engine.
  2. Install the cylinder head.
  3. Install NEW cylinder head bolts. Torque the bolts in sequence, as follows:
    1. Step 1: 37 ft. lbs. (50 Nm).
    2. Step 2: Plus 120 degree turn.
To install:

0996b43f802316ea.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Tighten the cylinder head bolts using the following sequence-31L and 3.4L engines

  1. Install the cylinder head with a new gasket.
  2. Apply thread sealer to the head bolts.
  3. Tighten the cylinder head bolts to 37 ft. lbs. (50 Nm) plus an additional 90 degree turn.

Dec 16, 2010 | 2002 Pontiac Grand Prix

1 Answer

Im having to change my head gasket, whats the torque spec and sequence on a 96 landrover discovery? im changing both head gaskets. anything i should know?


start in middle and work outwards alternately ,bolt torque 80lbs and pull down if three passes ,speed key --rachet- torque wrench .although iam posting this i never use a torque wrench i go by the feel of the bolt stretching ,make sure heads have been checked and skimmed before refitting

Aug 10, 2010 | 1997 Land Rover Discovery

1 Answer

Whats the torque specs on a 2001 ford focus 2.0


You need to buy the manual, because you also need to know the order in which to torque them.
http://www.car-stuff.com/mmparts/ford-focus/repair_manual.html
usually you start at the middle and circle outward.
But they can differ. Some cars you always need to put in new head bolts. Others are done in several stages. This is too critical to take chances on.
If you really can't afford $19 for a manual, go to the library and xerox the pages.

Feb 09, 2010 | 2001 Ford Focus

1 Answer

Whats the valve clearance for toyota 4k engines and the torque for cylinder head bolts?


valve clearance is .20mm for the intake and .30mm for the exhaust. Will try to find cylinder head torque for you.

Jan 25, 2010 | 1983 Toyota Celica

2 Answers

Whats the torque for the head bolts on a 98 hyundai elantra


The cylinder head bolts need to be torqued at

  • 10MM bolts 22 FT-LBS
  • 12mm bolts 26 FT-LBS

Jan 20, 2010 | 1998 Hyundai Elantra

1 Answer

Torque specs


Head bolt torque is 65 ft lbs, use the below sequence, go over bolts 3x to reach final torque (not all at once to 65)

13 5 2 10
front of engine 17 9 1 6 14
16 12 8 4 3 7 11 15
good luck!

Oct 25, 2008 | 1988 Chevrolet K1500

1 Answer

Head screws


2001 Daewoo Lanos Cylinder Head Bolt Torque Specs
Torque bolts in sequence
(looking down on the engine from front of car)

belts 1 3 9 5 7 trans
belts 2 4 10 6 8 trans

Step 1: 18 ft.lbs. (25 Nm)
Step 2: Plus 60 degrees
Step 3: Plus 60 degrees
Step 4: Plus 60 degrees
Step 5: Plus 10 degrees

Sep 22, 2008 | 2001 Daewoo Lanos

2 Answers

Torque settings


  1. Tighten the cylinder head bolts sequentially in three steps. NOTE: Perform each step twice. 1st step torque: 39 Nm (4.0 kgf-m, 29 ft. lbs.) 2nd step torque: 69 Nm (7.0 kgf-m, 51 ft. lbs.) 3rd step torque: 98.1 Nm (10.0 kgf-m, 72.3 ft. lbs.) Use a beam-type torque wrench. When using a preset-type torque wrench, be sure to tighten slowly and not to overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt, and retighten it from the first step.

Aug 02, 2008 | 2004 Honda Odyssey

Not finding what you are looking for?
1997 Buick Skylark Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...