Question about 2002 Ford Thunderbird

4 Answers

Line that carries freon. What does it look like?

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 8,180 Answers

It is an aluminum line that goes from the firewall to the compressor--this is the low pressure or return line. There is a second smaller line that goes from the firewall to the radiator--this is the high pressure line. The system is charged using the smaller port on the larger, low pressure line. The port looks like the valve on a tire, but is larger. There is a similar port on the high pressure line, but it is larger yet, and your recharge hose will not fit on it. Please let me know if you have more questions, and thanks for using FixYa.

Posted on Apr 09, 2011

Testimonial: "It was helpful."

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2002 thunderbird, key fob will not lock or unlock doors. when pushed a clicking sound comes from inside the door.

Posted on Apr 12, 2011

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 23 Answers

Should look "shiny", and there is a thick one and a thinner one

Posted on Apr 09, 2011

  • June Cook Apr 09, 2011

    What is it made of and what does it connect to and from? Saying it is shiny does not
    answer my question. June Cook

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 112 Answers

line that carries freon. What - edwardafzal_6.gif

This what both look like.

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need to know what the evap hose looks like


A/C systems have two hoses, a smaller diameter one for high pressure and a larger diameter one for low pressure. High pressure freon is compressed in the compressor and and pumped under pressure in the smaller hose to the evaporator where the freon is expanded/evaporated and becomes cooler via the expansion process. Here the freon absorbs heat. The larger hose then carries the expanded/evaporated freon to the radiator where it is cooled, then on to the compressor.

Oct 17, 2016 | Cars & Trucks

4 Answers

2004 sebring air conditioner stops and starts


Low freon will cause the compressor to short cycle, when the compressor runs the pressure in the low line is pulled down and the low pressure switch turns it off. Not running the pressure builds up and turns it back on. In the old days there was no low pressure switch, with no freon to carry the oil the compressor was destroyed.

Jun 28, 2014 | 2004 Chrysler Sebring

1 Answer

I have a 2001 Sebring when I push the air button the light does not come on an the air does not work


Assuming has been working. First check the freon. The air will not come on if the freon pressure is low. This is a safety feature to protect the compressor that depends on freon to carry the oil that lubricates it

May 15, 2014 | Cars & Trucks

1 Answer

A/c system the high side line gets very hot ?


Yes. One line gets hot and the other gets cold. The freon gas carries hot air out of the passenger compartment and expells it from the condenser. The freon gas changes from gas to liquid and back again.

Jul 12, 2013 | Cars & Trucks

1 Answer

How to add freon to 2003 chrysler 300m with pictures


He is not an expert. This should be carried out at a garage with experience ofChrysler. It should be carried out only by qualified personnel, having an accident with freon can blind. Take it to a Chrysler man/woman is my advice, you will have the peace of mind that it has been done properly

Jul 20, 2012 | 2003 Chrysler 300M

1 Answer

If I strap terminal 3 to 5 on the compressor relay the compressor comes on. What controls the compressor relay?


THE LOW PRESSURE SWITCH
SYSTEM IS PROBABLY LOW IN FREON
TO CONFIRM LOCATE LOW PRESSURE SWITCH AND JUMP
THE TWO PINS IF COMMPRESOR ENGAGES THR SYSTEM IS LOW
DONT LEAVE IT JUMP YOU WILL BLOW UP COMPRESSOR
NEEDS FREON TO CARRY COMRESSOR OIL TRUE OUT SYSTEM

May 07, 2011 | Chevrolet Lumina Cars & Trucks

1 Answer

Where to replace refrigerant; no cold air blowing


ac lines under the hood carry r134 through the ac system. there are high pressure lines and low pressure lines. each side has an opening for service. it is not uncommon for the system to lose refrigerant and either be less efficient or not work at all. to add freon to the system runs the risk of overcharging which will cause the system to run less efficient and possibly cause damage to the compressor or seals. the charging or adding of freon is always done to the low side and you can identify the low side by the size of the line. you will see there are two obvious sizes of lines. find both connection points first and make sure you know you are dealing with the larger lines which is the low pressure side. attaching to the high side could cause a can to explode and you could be injured!! with the engine running and the ac on its coldest setting with the fan at maximum speed you open the freon can with it in the upright position. verify that the compressor is engaging the clutch on the compressor. cans usually contain about 12 oz of freon. stay away from the mixes that try to give you stop leak and lubricant. try one can and see what you get. about those lines the size of the high side is like a pencil and the low side is like a magic marker. that should help you identify them. if you need more please reply and good luck

May 09, 2010 | 2000 Jeep Grand Cherokee

2 Answers

I have an 1998 GMC jimmy 4.3 motor .my air conditioner quit working so I thought it needed charging .but once I hooked of the canister to refill the aircon I seen the compressor was not turning .so I...


There should be a low pressure switch located on one of the metal a/c lines. It probably has 2 wires. Sometimes it is necessary to 'jump' across this switch to complete the circuit to the compressor until it starts to accept freon and build pressure. This is a safty feature designed to prevent the compressor from locking up due to the absence of oil, which is carried by the freon. Good luck. Dave

Jul 13, 2009 | 1998 GMC Jimmy

1 Answer

Location for adding freon


add freon to low pressure side . low pressure side is large line with small fitting. high pressure line has a large fitting.

Apr 04, 2009 | 1999 Cadillac DeVille

Not finding what you are looking for?
2002 Ford Thunderbird Logo

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...