Question about 1998 Jeep Cherokee

Open Question

Need wiring diagram for clifford car save immobilizer model AX2337AB

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


yes you can replace PCM with same year model and motor
numbers must match
some online , US Ebay or a wrecker

for less issues
after fitting requires the correct diagnostic tool to link up
air bag, abs ,ignition ,immobilizer and other modules,

in most cases the internal wireing of a manufactures car
PCM is not released to the public

....only replacement PCMs

a full factory repair manual of a lumina
may will have limited wiring diagram



Mar 20, 2017 | Cars & Trucks

1 Answer

2002 buick rendezvous ignition key immobilizer wire color diagram image

Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Oct 22, 2016 | Buick Cars & Trucks

1 Answer

Clifford car starter unlocls doors but dosen't start truck , when i try to start it the park lights blink 4 or 5 times

I suspect that your truck has an immobilizer that you have to mobilize before you start. That are the characteristics of immobilized starters.

Nov 27, 2014 | Cars & Trucks

1 Answer

Key immobiliser ignition switch

Most audio mobile mechanics are trained in installing alarms as well as other things on cars part and present. It would be worth finding one and enquiring about your alarm. When you phoned Clifford I am guessing that you spoke to the receptionist and they just looked it up on their computer as the model is not stocked they probably won't help as it most likely wouldn't of had any warranty anyway. I had a 97 corolla and it had a stock alarm on it and it was good. Good luck anyway. If you are not confident enough don't touch as electrics are tricky on cars specially when taking advice that is noteface to face at the problem.

Sep 14, 2013 | 1997 Toyota Corolla

1 Answer

I have a hyundai excell sports and the mobulisor was not working thus i could not start it so i cut the wires but now when you turn the key nothing works how can i fix that without connecting the mobulisor...

Bypass the immobilizer system. You'll need the wiring diagram. Go to and register. After you do this, you'll have access to manuals, service bulletins, wiring diagrams, etc.about your vehicle.

May 15, 2009 | 1989 Hyundai Excel Hatchback

2 Answers

I dont know where to hook up immobileizer bypass wire

An immobilizer bypass is an electrical circuit which allows current to flow to whatever component is starved of current to keep the engine from running (usually the coil). The immobilizer opens the circuit to the coil, the immobilizer bypass closes the circuit to the coil.

If you didn't install an immobilizer circuit, then you don't need the bypass. There are probably instructions you missed in the manual explaining the immobilizer circuit.

Apr 30, 2009 | Honda Civic Cars & Trucks

1 Answer

2004 corolla

That is true, just installed the clifford matrix one mile range remote starter system... while looking at the pcm, it will be the harness farthest to the right. yes there are 2 black wires but the correct one is the left of the 2 on the very far right harness... verify with a volt meter... hook up positive lead to constant + 12 volt source and probe the ground to that black wire and start the engine... meter will read between 1-6 volts... good luck.

Jun 07, 2008 | 2004 Toyota Corolla

Not finding what you are looking for?
1998 Jeep Cherokee Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides