Question about Volvo S70

1 Answer

Need to know how to remove the T.P.S. on my car and the exact location.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 437 Answers

With no information about your vehicle other than the make, and the fact that it is a car rather than a truck, no one can tell you the exact location of anything. Oh yes, and we know it has a Throttle Position Sensor so that suggests that it was manufactured sometime in the last 30 years and it does not have a modern drive-by-wire throttle.
Have someone press the gas pedal repeatedly while you look under the hood for that parts that move when the throttle is moved. There should be a cable rotating a wheel on the side of your throttle body. On one end of the shaft that goes through the throttle body and is rotating, is the TPS. It will help if you go to an on-line parts vendor and look up the TPS for your car so you can see a picture of it before you go looking for it.

Posted on Apr 10, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to know the exact location of the fuel Pump on a 1992 Cadillac Sedan Deville

It is exactly located inside the fuel tank, which must be removed to replace the pump/sender module assembly.

Oct 06, 2017 | Cadillac Cars & Trucks

1 Answer

Need to know where power steering is located

What Power Steering Component?

Doesn't appear when you ask a question
like that,that you would have the skills to
be working on any vehicle

You only replace parts that are tested & fail

You don't have a vehicle shown here

Aug 19, 2014 | Buick Regal Cars & Trucks

1 Answer

Location of low side a/c service port

The low side port is located in the low pressure side of the AC system, this is the larger of the two lines comming from the compressor.

Jun 07, 2012 | 2005 Dodge Durango

1 Answer

I have a 1996 grand am need to know where throttle position sensor is located on car

As the name implies --- screws hold it
on the throttle body

You will have to follow & remove the plastic
air intake ducting, from the air filter to the
throttle on the engine.

We can not know, to the exact inch, where
every one is located on all vehicles

Jun 29, 2011 | 1996 Pontiac Grand Am

1 Answer

Im trying to change my oxygen sensor bank sensor one and need to know where it located and if there is anything special i need to know about changing it.

What size engine is in this Grand Cherokee? You should be able to get a 13/16 wrench on the hex and remove it. If clearance is an issue, then an O2 sensor socket that is available at most auto stores will be required. I'll need an engine size for an exact location of this O2.

Dec 26, 2010 | 2001 Jeep Grand Cherokee

1 Answer

Where is the fuel pump located in a '99' jeep cherokee? Need to know exactly where its located in correlation with gas tank and how to approach changing a bad fuel pump....

99% of all vehicles made for the last 30 years
have the fuel pump in the fuel tank.!!!!!

Obviously you have to remove the tank,to remove the pump

Dec 02, 2010 | 1999 Jeep Grand Cherokee

1 Answer

Replace ball joints

Remove wheel, before removing the ball joint, mark with a with pencil or some identifing object the exact location remove the ball joints and replace exactly the same way you removed them. Eliminates the need for a alignment. The ball joints located in the wheel well, you will need a good hammer about 3 to 4 lb, they have to be kocked out.

Jun 28, 2009 | 1986 Ford Bronco II

1 Answer

Where is that located, exactly? The heater core, I mean.

It is in the dash behind the glove box. You need to remove the lower dash bolts and pull the dash forward enough to remove the heater core cover. You need to remove the panel in the back of the glove box to access some of the bolts.

Apr 13, 2009 | 1990 Chevrolet S 10 4WD

1 Answer

Need starter location for 2002 montero sport

might be underneath the intake manifold.  

Nov 26, 2008 | 2002 Mitsubishi Montero

1 Answer

Need sarter location for 2002 montero sport

Right side (passenger side) of engine, midway down to the rear. Difficult to reach on some 4x4 models

Nov 26, 2008 | 2002 Mitsubishi Montero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts


Level 3 Expert

78238 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides