Question about 1999 Mazda 626

1 Answer

CAR KEY I LOST THE ONLY KEY TO MY 1999 MAZDA 626. I WAS FIRST TOLD THERE WAS NO CHIP IN THE KEY BEFORE 2001. DOES THE KEY HAVE A COMPUTER CHIP IN IT? I HAD A DEALER TELL ME THERE IS NO CHIP, A 6.00 KEY, AND ONE TELL ME THERE IS A CHIP, A 120.00 KEY. I WAS TOLD THE KEY CODE WAS ON THE PASSENGER SIDE INSIDE CYLINDER. THEY COULD NOT GET THE KEY CODE FROM THE VIN#. THE CAR HAD TO BE TOWED TO THE DEALER AND THEY ARE NOW MAKING THE 120.00 KEY...BY THE WAY, THEY SAID A SECOND KEY IS ONLY 25.00. THANK YOU FOR ANY HELP YOU CAN GIVE ME.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 61,292 Answers

The 1st key cost more because they have to reset the cars security system to make it recognize the new key, once that is done is easy to do the 2nd key, thus less money for the second key.

Posted on Aug 08, 2008

3 Suggested Answers

  • 1986 Answers

SOURCE: I need to replace the passenger sid mirror on a 98

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

cardenderek
  • 783 Answers

SOURCE: I have a 91 mazda 626. directionals and4 ways dont work properly

check all of your wires with wire tester. maybe they are being shorted out somewhere. Check your fuses to make sure none are blown/bad. Check the light bulbs to make sure they aren;t blown.

Posted on Mar 11, 2010

  • 1949 Answers

SOURCE: 1993 Mazda 626 sedan with 4 cylinder engine and

try haynse.com theand the hold makes it stay in that gear longer making it shift at higher rpms

Posted on Dec 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shrader valve on a 2001 626 Mazda


there is no shrader valve on the 626 u need to pull the plug on the top of the filter but your problem sounds like a main relay under dash

Feb 14, 2014 | 1999 Mazda 626

1 Answer

I have lost the key to my Mazda 626, I have a spare key but this only opens the door. It does turn the car over but because of immobiliser it won't start car. Going to cost $500 to get a new key through...


Without having a spare key with the chip, its going to be expensive.
A locksmith may be able to make a roadside service call and get it done, but probably not much cheaper than the dealer.

Jan 21, 2014 | Cars & Trucks

1 Answer

Lost my main set for a Mazda 323 (1999). Located the spare set, which starts the car, but the immobilizer kicks in. Is there a way of pairing my key to the car, or disconnecting the immobilizer, or is this...


The spare key is the valet key, You can call the dealer and have them cut you new keys for you car. You will need the VIN number and your registration for the car. If it doesn't have chip in it, they can make it for you in a couple of minutes. If it has the chip in it, they will have to order it. Without the chip, the key will cost between $20 and $30 dollars.

Dec 26, 2010 | 2000 Mazda 626

1 Answer

I have a 1999 Mazda 626, I was driving and the car just shut down, The engine turns but won't start.


Seems like you lost fuel pressure. Have the fuel pump checked and see how many pounds you have at the motor.

Sep 12, 2010 | 1999 Mazda 626

1 Answer

Lost the key to a 02 or 03 mazda 6 - had keys made but before it was lost but they don't have the computer chip - how can I get a replacement key with the computer chip in it?


most key shops have these keys in stock/on the shelf but if you get stuck contact a local mazda dealer(they will need coding to the car......)

Aug 02, 2010 | Mazda MAZDA6 Cars & Trucks

1 Answer

2001 Mazda 626 4/cyl/ The immobilzer unit problem


that is bollox,the dealer has 30 mins to recalibrate the system or it will shut down and need all he said,is he for real a mazda dealer.........or are you rich looking????? get it to another dealer,ask them to get 2 keys and recalibrate(assuming the first dealer has not caused a meltdown of the system.....)the problem you may have is they may not know about the 30 min rule...its to stop thieves from changing keys on stolen cars.......

Jun 02, 2010 | 2001 Mazda 626

1 Answer

The battery died i replaced it now the car won't start. its a 2002 626, i was told that there is some chip in the key that needs to be associated with the computer again?


do you have headlights? on accessory, do you have a 'live' dash display? if not- are your battery connections tight? is the + connected to the + terminal and the - to the -? if not, then there may be a blown main fuse! if you have lights, try turning the key from 'off' to 'accessory' 3 times. this may reset your computer. don't forget, when the battery was replaced, your main and secondary computers lost some data and need to re-program. your key may also need to be 're-set', but if you have lights and dash activity, when on 'accessory', then you may need your main computer re-set at a qualified service facility! ah! for the good old days!
good luck!

Oct 17, 2009 | 1999 Mazda 626

1 Answer

Failed inspection - mazda 626, year 2001


Your cig lighter is only supposed to operate when your key is in the on or acsessory position. Did the tester turn the key on,or start the car?

Aug 20, 2009 | 2000 Mazda 626

2 Answers

1999 mazda 626 key stuck in ignition


sound like the tummblers are sticking use graphite to lubricate the tummblers

Aug 14, 2009 | 1999 Mazda 626

1 Answer

Lost keys to a mazda 626 yr 1999. how do i get a new key or do i need to brake into the car and put new locks????


before u break in to the car call a local lock smith, or wait and call the dealer where the car was sold, if u have that info, that dealer will have the codes to cut u a new key.

Mar 01, 2009 | 2004 Mazda 6

Not finding what you are looking for?
1999 Mazda 626 Logo

Related Topics:

440 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...