Question about 2002 Ford Thunderbird

Open Question

Door lock trouble- my 1997 ford thunderbird doorlocks are not working corectly. the driver side switch will only UNlock both doors, not lock. The passenger side switch will not work at all. But...I have replaced both door switches and that didnt help at all.It does not have keyless entry. Any ideas on how to fix it?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: 92 F150 power window and locks

try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.

Posted on Jun 11, 2008

Ad
emissionwiz
  • 76846 Answers

SOURCE: keyless entry and door locks

Do you have he owners manual? instructions are in there for the keyless entry system. If not go to this link:

http://www.motorcraftservice.com/pubs/content/~WOTEXP/~MUS~LEN/41/96expog1e.pdf

Posted on Sep 21, 2008

warlock61
  • 659 Answers

SOURCE: keypad keyless entry code missing

Ford has an add on keypad also if it is pretty much flush on the door it is factory if it is a fat keypad it is an add on The factory module is under the dash by the fuse panel the number should be on it

Posted on Nov 22, 2008

Scorpedo
  • 111 Answers

SOURCE: ignition control module location for 1997 ford thunderbird?

It should be right on the side of the distributor, a small ( usually grey ) plastic type box with 4 connections on one end if i remember right.

Posted on Dec 12, 2008

  • 65 Answers

SOURCE: 96 ford explorer door will not lock with switch

I do have a book on the 1996 but no on me but I have had a problem with it the same, Get in and sit in the drivers set and push lock from the in side and then do the same but this time unlock it and then get out and try to use the remote. if no then try to do the same thing but in the passenger side. lock and then unlock. no then call the ford dealer shop and they have a alarm department that will help you and I know because I had then do a job on one of my other cars and I was charged $20.00 he did it on a side job. Nikki2913

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door locks not working


could be a wiring short, but if you hear the lock motor moving i believe the lock actuator has broken free. the rivets break free at times and i've used screws and washers the reattach the actuator in place without having to pull apart the door. try to see if you hear 1 doorlock at a time. if when you press the button, the motor sounds and theres movement thats your problem. if you press and theres no motor then you either have no power to the motor or its bad. current tester to the switch will tell you either way.

Oct 18, 2013 | 2002 Ford Expedition

1 Answer

94 cougar doorlock button on both doors will not unlock but it will lock


Seems like with a stroke of bad luck both switches went bad or u lose power to ur feed wire for the unlock side

Feb 27, 2012 | 2002 Mercury Cougar

2 Answers

Doorlocks dont work except from passenger side. mirrors dont work. windows dont work from anywhere


First, check all fuses to make sure that none are blown.

If the door lock switch works on the passenger side, then the drivers side door lock switch is probably faulty. Use a multi-meter to test the Drivers Side Door Lock Switch (Black and Pink/Light Green wires unlock the vehicle, and the Black and Pink/Yellow wires lock the vehicle)
If the switch is tested and found to be operating properly, you may have a faulty Body Security Module or Drivers Side Door Lock Actuator.

If neither of your Power Mirrors are working, you probably have a faulty Exterior Rear View Mirror Switch, Power Mirror Module, or blown Central Junction Box Fuse.

If none of your Power Windows are working, you probably have a faulty Accessory Delay Relay or a blown fuse in your Central Junction Box or a faulty Master Window Adjust Switch (all of the Power Window Switches feed through this Master Window Switch). If the Power Windows didn't stop working at the same time, you may have faulty Window Adjust Switches, or faulty Power Window Motors, this is very unlikely though. It would also be a good idea to inspect the wiring for any obvious damage.

Mar 15, 2011 | 2005 Ford F-150

2 Answers

We can't get the power locks to unlock on rear doors of our 2003 gmc crew cab with remote or door control button. They will lock though no problem with remote and the buttons on either front door.we also...


I fixed my doorlock problem today.It did the same thing as yours,it was the relay for the rear door lock and unlock located on the drivers side of dash by the drivers door.easy cheep fix.hope this helps

Nov 01, 2009 | 2000 GMC Sierra

1 Answer

Driver side unlock button will not unlock any doors.


Try taking the switch out and spraying it with some electrical cleaner. It's probably just dirty. If not, replace the switch.

May 05, 2009 | 1997 Ford Explorer AWD

1 Answer

Power door locks; unlock but not lock.


replace switch. if problem on all doors replace master on driver side door. switch has two modes: lock & unlock. Unlock is working, lock is not working, means power is good, individual switches are good, master switch is bad. Replace from used car fine.

Apr 23, 2009 | 1997 Ford Explorer AWD

1 Answer

Accessing the speaker on driver side door panel.


You will have to remove the entire door cover. Remove any screws you can see, pop off the cover behind the door handle remove screws behind that, pop off the plastic that holds power window switches and unplug them, then you will have to pull the door panel upwards to remove.

Mar 27, 2009 | 1997 Ford Thunderbird LX

2 Answers

Keyless entry and door locks


Do you have he owners manual? instructions are in there for the keyless entry system. If not go to this link:

http://www.motorcraftservice.com/pubs/content/~WOTEXP/~MUS~LEN/41/96expog1e.pdf

Sep 21, 2008 | 1996 Ford Explorer

1 Answer

92 F150 power window and locks


try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.

Jun 11, 2008 | 1992 Ford F150 SuperCab

Not finding what you are looking for?
2002 Ford Thunderbird Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...