Question about 1986 Ford LTD

1 Answer

Where do I put motor oil in a 1986 Ford LTD - 1986 Ford LTD

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 60 Answers

Usually oil is added through the valve cover,

Posted on Apr 09, 2011

  • 2 more comments 
  • dgirlswagga Apr 09, 2011

    All I see is a top with a S on it and Im trying to figure out if thats where the oil go

  • imdammgood Apr 09, 2011

    do you know what a valve cover is.there should be a cap, or pvc valve(posotive cranckcase ventilation valve.)sometimes it says OIL or if upside down 710,sometoimes it has the oil grade on it. example 10w30 or 5w30 the oil should pour straigh into the top of the valve cover.

  • imdammgood Apr 09, 2011

    is the oil level low.if you had to you could pour it in the cranckcase dipstick tube as a last resort.but that would take a long time....

  • dgirlswagga Apr 09, 2011

    Yes I know what a valve cover looks like I've put oil in many vehicles but I jst bought this car & its very confusing. It doesnt have a owner manual & I've never seen a valve cover with a capital "S" on. I mean it doesnt say anything else. I guess I'll just use the dipstick option. I have a small funnel for that. Thanks a bunch. If you have any more input it is greatly appreciated.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location for fuse box on 86 ford ltd


Under Panel Left Of Steering--some under panel--some have release.

Oct 17, 2014 | 1986 Ford LTD

1 Answer

My 1986 Ford LTD is missing badly. I've changed the spark plugs and wires, the distributor, ignition coils, modulator. But it's still missing. When I get to around 45 mph, the miss smooths out a...


SOUNDS TO ME THAT YOU HAVE A SENSOR GONE BAD...TAKE IT TO YOUR LOCAL FORD DEALER AND HAVE THEM DO A TEST ON YOUR CAR...THE SENSORS ONLY COST AROUND $5.00, BUT YOU NEED TO KNOW WHICH ONE IT IS!

HOPE THIS HELPS!

Sep 07, 2011 | 1986 Ford LTD

1 Answer

I hav a86 ford ltd. Its getting fuel but all the car does is spin


need more info, do you mean all the motor does it spin over? Does it spin over really fast? If it does, then it sounds like your timing chain/belt is in need of repair

Jan 04, 2011 | 1986 Ford LTD

1 Answer

I have a 1986 ford ltd,6cill. small sedan,theres i guess a vacuum distributer on the driver side firewall. on the lower left port there was something, but i noticed there was no hose attached so i put a...


The one you capped could have been capped from the factory. The hose that goes thru the firewall goes to the heater controls and the one that is tee'd to it should go to a vac can. It will be a plastic ball or a metal soup can.

Jul 25, 2010 | 1986 Ford LTD

1 Answer

Where is the fuel filter located on a 1986 Ford LTD Crown Victoria Station, 5.0


Located in right rear under a red cylindrical plastic cover held on by 2 8mm screws

Apr 02, 2010 | 1986 Ford LTD

1 Answer

Need a schematic for the computer in a '86 Ford Crown Vic LTD


Under hood, driver side, upper firewall, mounted above power brake booster. You can buy the diagram for the engine at several places online.

Nov 20, 2009 | 1986 Ford Crown Victoria

1 Answer

Location of fuel filter Ford LTD 1986


at rear near the fuel tank, round can shaped filter.

Jul 17, 2009 | 1986 Ford LTD

1 Answer

1986 Ford LTD 5.0 engine; Failed HC emissions. Did tune up, new air filter,oil change. 2 bottles of HEAT and 1 bottle of Guarantee to pass. HC came back 2.90 passing is 2.50. What could it be.


Heat is pretty much methanol...it will counteract the effects of the other additive you used. Run that stuff out of there and try using 3oz of acetone per 10 gals of fuel and possibly adding a couple of degrees more advance to the timing. If you know anyone with a gas analyzer, perhaps they can help you get it set up.

Jul 09, 2009 | 1986 Ford LTD

1 Answer

Indicators not flashing or making clicking noise 1986 ford ltd australian model


It is likely a simple flasher causing your problems. Try locating it under your dash board and swapping it with the hazard flasher for a quick check. They sell for a few bucks at the parts store.

May 10, 2009 | 1986 Ford LTD

1 Answer

1986 ford ltd


tps sensor is bad(throttle position sensor)

Aug 29, 2008 | 1986 Ford LTD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...