Question about Toyota 4Runner

1 Answer

Air not working blows hot air no matter what you set it on,temp switch does change temp at all ,compressor seems to be kicken on

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

There should be switch w/a cable & should be next t/th 2 small hoses coming out of th 'fire-wall' see if its moving, when u switch th "temp" switch from th inside on th DASH..

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Montana ac problem


some external sensor has taken a knock etc
sounds like its not getting whats going on outside
or the evaporator has an issue with its drains
perhaps something in the air intakes

Dec 23, 2014 | 2001 Pontiac Montana

1 Answer

2003 Lincoln Town Car AC blows hot air no matter what the temp is set to. Issue started suddenly (just after an oil change) - not a gradual loss of cool air like my other vehicles have had. Help please...


Satrt by checking the wiring to the a/c compressor, also check the level of the R-134a. Also check the connector to the low pressure switch to make sure it has not been accidently dissconnected.

Sep 12, 2013 | 2003 Lincoln Town Car

1 Answer

Passenger side doesn't blow warm air no matter what temp is set on drivers side seems to work just fine


the fresh air vent is stuck open r the hose is off on back of vent vent should pop out to reconect

Jan 18, 2013 | 1995 Buick LeSabre

1 Answer

A/C blows only hot air in 2004 GMC Yukon XL.


Is it properly charged? A check of the pressures would be a place to look next.

May 10, 2017 | 2004 GMC Yukon

2 Answers

Air conditioner blows hot air inadvertantly.


possibl ac compressor clutch problem,cooling fan at rad not working so ac goes into high press mode and turns off(so it doesn,t blow system apart,built in safety)not enough r134 in system(low charge)

Sep 19, 2009 | 1997 Chrysler Concorde

1 Answer

2002 Chevy Tahoe, started with rear a/c blowing warm/hot air, then it started working again. Now both rear and front a/c blows warm/hot all the time. All speeds seem to be working in front and back....


sounds like a leak. Have your system checked for leaks and re-charged. If the system is full of refrigerant, then check the pressure switch on the compressor and the pressure switch on the accumulator (dryer). If the pressure in the system is low, these switches prevent the compressor from running to prevent damage.

Jul 16, 2009 | 2002 Chevrolet Tahoe

1 Answer

A/C air sometimes cold, sometimes not on VW Beetle 2001 Turbo


AC will not work with temps are cold even when it is turned on. The air is colder cause the temp is colder. The AC cycles in hot weather because the AC charge is low and needs recharging. You will know this if you open the hood run the AC and you will hear the clicking sound of the AC compressor magnetic clutch. You can recharge it easily buy buying a compatible can of refrigerant. I suggest buying the kit with the gage so you don't overcharge the system which will cause freeze ups

Jul 03, 2009 | 2001 Volkswagen Beetle

1 Answer

Blowing hot air all the time


There is a door that opens to the heater core.When the vacum control in the dash gets old the diaphram gets to flimsy to close one port so it puts vacum to all ports.Therefore there is not enough pull to engage the vacum motor to move the trap door.Change the switch in the dash. Check to make sure that there isn't an obstructing object in front of the door before you buy a new switch

Jun 02, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...